We never sell your data to third parties
Boston Gear 30216886 G675 brass internal spur gear with 16 diametral pitch, 75 teeth, and 14.5 degree pressure angle. Suitable for general industrial open gearing applications requiring corrosion resistance and low noise.
MODEL G675
Contact supplier for technical support on: 800-626-2120
$230.50 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Diametrical Pitch
24
Face Width In
0.255
Family Id
30, 060
I.D.
1.47
Inside Diameter In
1.470000
Material
Brass Face Width In 0
O.D.
2.25
Outside Diameter In
2.250
Pitch Diameter In
1.500
Pressure Angle
14-1/2 Degree Pressure Angle
Pressure Angle 02
14.5
Weight Lbs
0.201
Specifications
| Altra Master No | 30216886 |
|---|---|
| UPC | 781711120460 |
| No Of Teeth | 36 |
| Inside Diameter In | 1.470000 |
| Diametrical Pitch | 24 |
| Outside Diameter In | 2.250 |
| Material | Brass |
| Face Width In | 0.255 |
| Description | Boston Gear's internal gears are spur gears turned "inside out." In other words, the teeth are cut into the inside diameter while the outside diameter is kept smooth. This design allows for the driving pinion to rotate internal to the gear, which, in turn, allows for clean operation. Intended for light duty applications, these gears are available only in brass. When choosing a mating spur gear, always remember that the difference in the number of teeth between the internal gear and pinion should not be less than 15 (14 1/2° PA) or 12 (20° PA). |
| Family Name | Internal Spur Gears |
| Pitch Diameter In | 1.500 |
| Product Description | Internal Gear, 14 1/2 PA, 24 DP, 36 Teeth, Brass |
| Weight Lbs | 0.201 |
| Family Id | 30,060 |
| Pressure Angle | 14-1/2 Degree Pressure Angle |
| Pressure Angle 02 | 14.5 |
| Unit Of Measure | English |
| california provision | WARNING: This product contains lead, known to the State of California to cause cancer and birth defects or other reproductive harm. |
SKU: 6132994
Speed reducer purchase
The purchase was easy it did take two purchase until we got the correct part I guess it was a fault on both parts as we were looking at the wrong part number, but overall the purchase was good part fit perfectly. Thanks for your support.
Read moreSKU: 34774
Quality
very high quality. using these gears in a model 9 cylinder radial engine with a 1" bore. about 8 h.p. , for oil pump a scavenge pump timing gears and distributor . very good quality gears.
Read moreSKU: 35104
12d.p. 14t spur gear
This item was closer to exactly what I needed than I had thought possible to find in the last 75 or so years. quite affordable, too. I almost didn't look, but when I did, there it was. I had in hand in just a couple of days.
Read moreSKU: 36216
Worm
Haven't used them yet, but they match the worm gear perfectly. They should serve the purpose for which I purchased them.
Read more
SKU: 6132994
Speed reducer purchase
The purchase was easy it did take two purchase until we got the correct part I guess it was a fault on both parts as we were looking at the wrong part number, but overall the purchase was good part fit perfectly. Thanks for your support.
Read moreSKU: 34774
Quality
very high quality. using these gears in a model 9 cylinder radial engine with a 1" bore. about 8 h.p. , for oil pump a scavenge pump timing gears and distributor . very good quality gears.
Read moreSKU: 35104
12d.p. 14t spur gear
This item was closer to exactly what I needed than I had thought possible to find in the last 75 or so years. quite affordable, too. I almost didn't look, but when I did, there it was. I had in hand in just a couple of days.
Read moreSKU: 36216
Worm
Haven't used them yet, but they match the worm gear perfectly. They should serve the purpose for which I purchased them.
Read moreItem must be unused.
Item must be in it's original package.
25% Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/