Dixon 3040-DA-BR Cam & Groove Jump Size Type DA Coupler x Adapter is a reducing fitting with a 3 in x 4 in size. Constructed from brass with a Buna-N seal, this coupler-to-adapter configuration provides reliable performance in fluid transfer applications.

Applications

Designed for use with liquids, consult Dixon for specific recommendations

Available Options

Other gasket types are available, contact Dixon.

Construction

Nitrile Rubber gasket

How It Works

• To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
• Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.

Note

In reducing couplings, the coupler is the first size in the part number.

Safety Notes

• Under no circumstances should cam and groove couplings be used for compressed air or steam service!
• Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.

Specifications

Produced to interchange with all product produced to Commercial Item Description A-A-59326D