Dixon 40022DLTAL Cam & Groove 22½° Coupler x TTMA Flange. This Type DL coupler features a 4" size and is constructed from 356T6 aluminum with a Buna-N seal. Designed for industrial fluid transfer applications requiring a 22½° offset connection to a TTMA flange.

Applications

Designed for use with liquids, consult Dixon for specific recommendations

Construction

Nitrile Rubber gasket

How It Works

• To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
• Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.

Safety Notes

• Under no circumstances should cam and groove couplings be used for compressed air or steam service!
• Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F (21°C) with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.

Specifications

Produced to interchange with all product produced to Commercial Item Description A-A-59326D