Dixon 600-DL-AL Cam & Groove Type DL Coupler x 150# Flange is a 6-inch fitting made from 356T6 aluminum with a Buna-N seal. This coupler connects cam and groove adapters to 150-pound flanges, providing a reliable connection in industrial fluid transfer applications.

Applications

Designed for use with liquids, consult Dixon for specific recommendations

Construction

Flange has flat face

How It Works

• To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
• Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.

Safety Notes

• Under no circumstances should cam and groove couplings be used for compressed air or steam service!
• Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.

Specifications

Produced to interchange with all product produced to Commercial Item Description A-A-59326D

Use

Flanges are designed to mate with #150 flange