DIXON B23 1 1/2 BOSS FEM SPUD

Dixon Valve & Coupling Dixon&Reg; B23

UPC: | UNSPSC: 40141734 | GTIN:

Pipe, Tube & Hose Fittings > Tube & Hose Fittings > Steam Fittings

Dixon® Ground Joint Washer Seal Spud, Series: Boss™, Fitting/Connector Type: Spud, 1-1/2 in Nominal Size, Thread Wing Nut x FNPT, Iron, Plated, Domestic

Features:

• The spud part of the coupling serves as one half of the connection and is usually fixed to the equipment
• The stem part that is clamped to the hose is the other half
• The two halves are connected or disconnected by rotating the wing nut on the spud, when connected they achieve both a mechanical and a pressure seal
• Easy to seal
• Boss couplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded outlet
• Use with boss washer seal fittings
• A Klingersil C-4401 washer is inserted between the stem and spud
• Recommended for steam service up to 450 deg F
• Worn-out hose couplings can be dangerous
• They should be checked regularly and replace when necessary
• Each coupling user should review applications and add safety devices where indicated
• Note: pressurized steam is an extremely dangerous commodity
• Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
• Always follow the manufacturer's product recommendations for pressurized steam handling
• Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

Specs:

• Fitting/Connector Type: Spud
• Nominal Size: 1-1/2 in
• Domestic/Import: Domestic
• End Style: Thread Wing Nut x FNPT
• Material: Iron
• Finish: Plated
• Series: Boss™

Packaging:

• Weight: 1.03 lb