DIXON CTER200 2" SANITARY TUBE WELD END

Dixon Valve & Coupling Dixon&Reg; CTER200

UPC: | UNSPSC: 40141700 | GTIN:

Pipe, Tube & Hose Fittings > Tube & Hose Fittings > Sanitary Fittings

Dixon® Sanitary Crimp Stem, Coupling Fitting/Connector, 2 in Nominal, Tube Weld x Hose Shank End Style, 316 Stainless Steel, 2-5/16 in Dia x 3-17/32 in L Dimensions, Domestic

Features:

• Dixon sanitary crimp stems are only to be used with Dixon sanitary stainless steel crimp ferrules
• Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
• Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
• For applications other than the ones list, please consult Dixon
• Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
• The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
• Media being transported through the hose should be compatible with the stem material
• Compatibility of ferrule material with the environment in which it will be used is recommended
• Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

Specs:

• Fitting/Connector Type: Coupling
• Nominal Size: 2 in
• Domestic/Import: Domestic
• End Style: Tube Weld x Hose Shank
• Dimensions: 2-5/16 in Dia x 3-17/32 in L
• Material: 316 Stainless Steel

Packaging:

• Weight: 0.8 lb

Warranty:

Limited