Dixon PL400L In-Line Lubricator with 3/4" Female NPT threads and aluminum construction. Designed for industrial hose systems to provide controlled lubrication to pneumatic tools and equipment.

Applications

• Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms.
• Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor.

Construction

Aluminum

Features

• Transparent sight disc allows visual inspection of oil level.
• Oil flow regulated by screwdriver screw adjustment.
• Minimum flow rate is 30 SCFM.

Installation

• Installation is recommended within 25 feet of the tool to be lubricated.
• Refer to the arrow for proper air flow direction.

Safety Notes

• Not recommended for constant flow applications. For reciprocating tools only.
• Do not use any synthetic oil or oils containing additives or solvents.

Use

Type of oil to use: Use any petroleum-based, non-detergent light weight oil (SAE 10/150SSU) which will readily break up into a mist, i.e., Mobil DTE light or comparable oil.