We never sell your data to third parties
Enerpac ZE41008MB 395309 Pump Elec. Universal VM33MVAC LCD 115V 8L
MODEL ZE41008MB
Contact supplier for technical support on: 800-558-0530 opt.2
Call for Pricing - 888-671-2883
Returnable: Yes
Brand
Enerpac
Model
ZU4420MB
Brand
Enerpac
Model
NC1019
Brand
Enerpac
Model
GA-45GC
Brand
Enerpac
Model
ZU4708MB
Cylinder compatability
Single-acting
Duty cycle
Extended
Max flow at rated pressure imperial
60 in3/min
Max operating pressure (psi)
10,000
Motor electrical specification
115 V, 1 Ph, 50/60 Hz
Motor hertz
50/60 Hz
Motor phases
1 Ph
Motor size (HP)
1.5
Motor size (RPM)
1,750
Motor voltage
115 V
Output flow rate 100 (psi in3 min)
650
Output flow rate 10000 (Psi in3 min)
60
Output flow rate 5000 (Psi in3 min)
62
Output flow rate 700 (Psi in3 min)
600
Pump control
Manual
Pump power source
Electric
Pump valve type
3-way, 3-position, Tandem Center, Venturi Return Assist Valve
Relief valve adjustment range (Psi)
1,000 - 10,000
Reservoir capacity (in3)
416
Sound leveld (Ba)
75
Usable oilcapacity gal
2
Valve model
VM33VAC
Valve operation
Manual
Model: ZE41008MB | ECCN:EAR99 | Harmonization:8413500070
Series: ZE | Product Line: Industrial Tools
Enerpac ZE4 electric hydraulic pumps are based on our Z Pump platform - our most efficient and market proven design. Z-Class high-efficiency pumps offer higher oil flow and by-pass pressure, cooler running and 18% less current draw than comparable pumps.
The ZE4 pump utilizes many of the same robust valves, reservoir, and pump components as other pumps in the ZE family. Combined with the efficient, easy to service pumping element, the ZE4 is suited to continuous use in manufacturing and workshop environments.
The 1.5 hp (1.12 kW) induction motor in the ZE4 enables productive flow rates, cooler running temperatures, quieter operation, and less power consumption than pumps with standard universal motors.
Multiple valve and control options allow you to match the pump to a wide range of pressing, punching, and many other operations.
- 1.5 hp (1.12 kW) induction motor for long life and quiet operation.
- Features Z-Class high-efficiency pump design; higher oil flow and by-pass pressure, cooler running and requires up to 18% less current draw than comparable pumps.
- Totally enclosed, fan-cooled industrial electric motors for an extended life and to stand up to harsh industrial environments.
- 75 dBA sound level.
- Low-voltage pendant, on certain models, provides additional safety for the operator.
- Multiple valve and reservoir configurations provide application specific models to match the most demanding industrial applications.
- Models available to suit single-acting or double-acting cylinders.
- High-strength, molded electrical enclosure protects electronics, power supplies and LCD readout from harsh industrial environments.
- LCD readout on electric valve models provides diagnostic and readout capabilities.
- IP54 Rating for superior dust and water protection.
- Wide range of optional factory installed accessories; including return line filter, pressure gauge, heat exchanger, skid bar, roll cage, foot switch, and more.
No questions match your search.
Are all Enerpac hydraulic pumps rated for 10,000 psi? This product
No, so check the rating before you connect a pump to a cylinder or tool. Most Enerpac hand pumps, such as the P392, P80 and P842, the ZU and ZE electric pumps and the Turbo II PATG, PAMG and PARG air pumps run at 10,000 psi (700 bar). Some are lower: the P25 hand pump is rated 2,500 psi, the P51 3,000 psi and the P50 5,000 psi, and the ZW electric pumps and PACG air pumps built for workholding are 5,000 psi (350 bar). Turbo II air pumps come in 700 or 350 bar versions, so check the model. Others go higher: the HPT1500 hand pump and the ZUTP1500 and ATP1500 tensioner pumps deliver 1,500 bar (21,750 psi), and the HPN2000 hand pump is rated 2,000 bar. Every hose, gauge and cylinder on the pump must be rated for its pressure.
How do I decode an Enerpac Z-Class pump number such as ZU4308MB? This product
Enerpac's ordering guide reads the number position by position. Z is the pump class, then the motor: U universal electric, E induction electric, A air. Next is the flow group (4 is 60 in3/min), then the valve type: 1 dump VE32D, 2 three-way two-position VM32, 3 three-way three-position VM33, 4 four-way three-position VM43. Two digits give the reservoir (04 to 40), then valve operation: M manual, L manual with LCD, J or P with pendant, S solenoid, D dump. The last letter is the voltage, B for 115 V. ZU4308MB is therefore a ZU4, VM33 manual valve, 8 litre reservoir, 115 V. For other voltage letters, or to choose a pump, Enerpac asks you to send the complete model number to its technical services team.
How do I match an Enerpac pump to my cylinder? This product
Start with oil volume and valve type. A cylinder's oil capacity is its effective area times its stroke, and Enerpac says the pump's usable oil capacity should be greater than the total oil capacity of all the cylinders and hoses it feeds. A P392 hand pump, for example, has 55 cubic inches of usable oil. Single-acting cylinders need a pump with a 3-way valve and one hose; double-acting cylinders need a 4-way valve and two hoses, so for double-acting tools Enerpac points you to the P842 rather than the P392. Finally, the pump, hose and cylinder must all be rated for the same pressure.
What oil should I use in an Enerpac pump, and how do I top it up? This product
Enerpac sells two oils and says not to swap them. HF oil (HF-101 in 1 gallon, HF-102 in 5 gallons) is formulated for powered pumps and is not for use in hand pumps; LX oil (LX-101) is for hand pumps and not for power pumps. XC cordless pumps take Enerpac HF oil only, and for MP multi-fluid hand pumps Enerpac's technical services team advises on other fluids. Use only Enerpac oil to protect the warranty. Add oil only with the cylinders fully retracted (extended for pull cylinders), otherwise the system will hold more oil than the reservoir can take, and fill only to the level mark on the pump. Non-vented hand pumps need some air in the reservoir to work. For hand pumps Enerpac says to drain and refill with clean oil every 12 months, more often in dirty conditions.
What do Enerpac cylinder and pump set numbers like SCR1010H mean? This product
The set number names the cylinder and the pump. SCR sets use an RC cylinder, SCH an RCH hollow cylinder, SCL an RCS low height cylinder, SCP a BRP Pullpac cylinder and SRS an RSM Flat-Jac. The digits are the cylinder model, so SCR1010H holds an RC1010 and SCH1003H an RCH1003. The suffix gives the pump: H is a hand pump (a P142, P392 or P80 depending on the full set number), FP a P392FP foot pump, TB a P392 hand pump with a carry case and gauge, and XA an XA air pump. Enerpac lists the SCR1010H and SCH1003H as a cylinder, two-speed pump, 6 ft hose, calibrated gauge and gauge adaptor.
Service
Verified · SKU 5945427Every time i need to place an ordere with MRO the service is always prompt and friendly. Read more
Brand
Hubbell Wiring
Model
AFBS1R6FFALU