We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring S13I DIMMER 3 WAY SLIDE 1000W IV
MODEL S13I
This vendor has a minimum order quantity of 3. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$151.43 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 3
Typically Ships in: 1 day
Returnable: See conditions
Amperage
3A
Voltage
300V DC/300V AC
The quick-disconnect industrial circular connector has taken on a whole new look, feel and level of performance. Introducing the new Hubbell Micro-Quick molded control connector for automation and manufacturing.
Specifications
| Product Type | |
|---|---|
| Termination Style | Insulation Displacement |
| Signal-Quick Product Type | Female Plug |
| Circuit Style | Single |
| Body Style | Straight |
| Poles | 3 |
| Cable Range | .16"-.21" (4.1-5.3) |
| Insulator Materials | Polyester Elastomer, Black |
| Contact Materials | Copper Alloy |
| Contact Plating | Tin over Nickel |
| Wire Guide | Nylon 6/6, Gray |
| Strain Relief Bushing | Neoprene, Black |
| Coupling Nut, Metallic | Zinc Alloy with Nickel Plating |
| Coupling Nut, Nylon | Nylon 6/6, Black |
| Receptacle Shell | Nickel Plated Brass |
| O-Ring | Neoprene, Black |
| Cable | #22 AWG - PVC jacket (black), PVC Conductor Insulation, Copper Braid - 85% Coverage, Stranding 19/34, #18 AWG - TPE jacket (black), PVC Conductor Insulation, Stranding - 41/34. |
| Strain Relief | #22 AWG - 20 pounds min per UL2238, #18 AWG - 30 pounds min per UL2238. |
| Voltage Rating | 300V DC/300V AC |
| Amperage | 3A |
| Contact Resistance | £ 5 MW |
| Isolation Resistance | ³ 1000 MW |
| Wire Range | #22 AWG Max to #24 AWG Min |
| Cable Diameter | .157" to.210" (3.9 to 5.3) |
| Ingress Protection | IP67 |
| Operating Temperature | -20° C to 110° C |
| Corrosion Resistance | 500 hours salt spray per MIL-STD-1344, METHOD 1001 |
| Vibration Resistance | 10-2, 000 Hz@15g per MIL-STD-1344, Method 2005 |
| Certifications | UL 2238 and UL50, File No. E192071. CSA Certified, C22.2 No.182.3 and CSA C22.2 No.94 |
| UPC Number | 78358522667 |
SKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read more
| Brand | Hubbell Wiring |
| Model | HC6B70 |
| Brand | Hubbell Wiring |
| Model | HI6C |
| Brand | Allen Bradley |
| Model | 800F-NUW |
| Brand | Gates Rubber |
| Model | 3020 3.1/4 |
| Brand | Union Butterfield |
| Model | 47023/8 |
| Brand | Grundfos |
| Model | 96082505 |
| Brand | LS Electric |
| Model | 02157360UL |
| Brand | LS Electric |
| Model | 02080001UL |
SKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/