We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
RAB VANLED75YFFRW Vandal-Resistant LED Fixture delivers 9,058 lumens at 129.5 lm/W efficacy. Rated 75W with 3000K warm color temperature and 84 CRI. Die-cast aluminum housing with vandal-resistant polycarbonate frosted flat lens. Universal 120-277V input with 0-10V dimming (dims to 10%). IP66 rated for wet locations. DLC listed. 100,000-hour L70 lifespan. Equivalent to 250W metal halide.
MODEL VANLED75YFFRW
Contact supplier for technical support on: 888-722-1000
$493.92 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
120V
0.63A
208V
0.36A
240V
0.32A
277V
0.27A
Air Tight
Housing certified Air Tight as per ASTM E283
Cold Weather Starting
The minimum starting temperature is -40C (-40F)
Color Accuracy
84 CRI
Color Stability
RAB LEDs exceed industry standards for chromatic stability
Color temp
3000
DLC Listed
Canopy Lighting)
DLC Type
DLC Premium
DLC Version
5.1
Driver
0.27A
Efficacy
129.5
Finish
White
Height
6.3
Hours
100000
IP Rating
Ingress protection rating of IP66 for dust and water
L70 Lifespan
100,000 Hours
Lamp Info
LED
LEDs
Long-life, high-efficacy, surface-mount LEDs
Length
13.3
Lens
Vandal-resistant polycarbonate textured opaque for low glare frosted flat lens
Lumens
9,058 lm
Maximum Ambient Temperature
Suitable for use in up to 55C (131F)
Power Factor
99.76% at 120V, 95.66% at 277V
Rated Power
75W
Rated power
69.9
THD
2.47% at 120V, 5.57% at 277V
UL Listed
Suitable for Wet Locations. Covered Ceiling Mount Only.
Volume
0.66
Wattage Equivalency
Equivalent to 250W Metal Halide
Width
13.7
Color Uniformity: RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Dark Sky Conformance: Conforms to (allows for conformance to) the IDA's fully shielding requirement, emitting no light above 90 degrees (with the exclusion of incidental light reflecting from fixture housing, mounts, and pole).
Dimming Driver: Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.
Finish: Our environmentally friendly polyester powder coatings are formulated for high-durability and long-lasting color
Housing: Die-cast aluminum housing and lens frame with (4) 1/2" NPS side conduit entries and weatherproof rear wire plug and access plate
IESNA LM-79 & LM-80 Testing: RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
Mounting: Ceiling mount to recessed junction with knockout template or directy to ceiling surface, utilizing side conduit entry points
