Image for Illustration purposes only. Actual product may vary
JET 321543 GH-1660ZX With ACU-RITE 203 DRO With Taper Attachment
MODEL 321543
Contact supplier for technical support on: 8002746846
$38,299.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: Yes
Number of Longitudinal and Cross Feed Rates
46/31
Range of Cross Feeds (IPR)
.0006 - .0360
Style (Type)
Engine - Large Spindle Bore
Swing Over Cross Slide (In.)
10
Motor (HP)
7-1/2 HP, 230/460, 3 Ph
Range of Inch Threads (TPI)
1-5/8 - 72
Number of Inch Threads
61
Number of Metric Threads
24
Length of Gap (In.)
12
Range of Longitudinal Feeds (IPR)
.0015 - .0900
Swing Over Bed (In.)
16
Number of Spindle Speeds
12
Spindle Taper with Sleeve
MT-7 (MT-5)
Drive
Geared Head
Compound Slide Travel (In.)
5-1/8
Spindle Bore (In.)
3-1/8
Spindle Mount
D1-8
Range of Spindle Speeds (RPM)
25 - 1,800
Tailstock Spindle Travel (In.)
5
Steady Rest Capacity (In.)
3/8 - 7
Weight (Lbs.)
5795
Range of Metric Threads
.05 - 20
Width of Bed (In.)
13-3/8
Carriage Travel (In.)
55-9/16
Overall Dimensions (L x W x H) (In.)
115 x 44 x 66
Cross Slide Travel (In.)
9
Max Tool Size (In.)
1 x 1
Swing Through Gap (In.)
25-1/2
Size
16 x 60
JET Engine Lathe, Series: ZX Series, 16 in Swing Over Bed, 10 in Swing Over Cross Slide, 60 in Distance Between Centers, 13-3/8 in Bed Width, #4 Morse Taper Tailstock Taper, #7 Morse Taper (#5 Morse Taper) Spindle, 25 to 1800 rpm Spindle Speed, 12 Spindle Speed, 9 in Cross Travel, 5 in Tailstock Spindle Travel, 55-9/16 in Carriage Travel, 5-1/8 in Compound Travel, 0.0006 to 0.0365 in Maximum Cross Feed Rate per Revolution, 0.0015 to 0.0913 in Maximum Longitudinal Feed Rate per Revolution, 7.5 hp, 230/460 VAC, 115 x 44 x 66 in
Dimensions
- Length: 116.5 in
- Height: 48 in
- Width: 40 in
- Length: 223679 cu-in
Features
- 3-1/8 in bore spindle is supported by two tapered and one ball bearings
- Chrome molybdenum headstock gears are hardened, ground and shaved
- Universal gear box allows inch, metric, diametric and module pitch threads, no change gears required
- Carriage features one shot lubrication and turcite-B on bed sliding surfaces
- T-slotted compound slide featuring four-way tool post
- One piece cast iron base absorbs vibration allowing heavier cuts
- High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground
- Removable gap allows large diameter work
- Five position automatic carriage stop increases productivity
- Attractive chrome levers, dials and knobs complete this impressive package
- Provides power, precision, efficiency and reliability to your metal shop
- 10 in 3-jaw scroll chuck with top reversing jaws, 12 in 4-jaw independent chuck and 12 in face plate
- Features four-way tool post, follow rest, large capacity steady rest, full length splash guard and coolant return
- Fully integrated coolant system and meehanite castings
- Large easy to use foot brake, articulating halogen work lamp, centrally located controls with jog button
- Features threading dial, mounting pads/levelers and comes with tool box as well as adjusting tools
- 122 longitudinal/cross feed rates
- 24 metric threads
- 1 x 1 in max tool size
- 25-1/2 in swing through gap, 16 in swing over bed, 0.05 - 2 metric threads, 3/8 - 7 in steady rest capacity, 61 number of inch threads, D1-8 spindle mount, 1/2 - 3-1/2 in follow rest capacity, 3-1/8 in spindle bore, 1-5/8 - 72 TPI, 16 in x 60 in size, 12 in length, 230 V prewired
Standards: ANSI Standards
Application: For metalworking
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
| Brand | J.W. Winco |
| Model | 41-50-1/2X13-150-D0-SK |