Image for Illustration purposes only. Actual product may vary
JET 321581 GHB-1340A With Newall DP700 DRO With Collet Closer
MODEL 321581
Contact supplier for technical support on: 8002746846
$14,279.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: Yes
Number of Longitudinal and Cross Feed Rates
40
Range of Cross Feeds (IPR)
.0006 - .0130
Style (Type)
Bench - Geared Head
Swing Over Cross Slide (In.)
7-25/32
Motor (HP)
2 HP, 230V, 1Ph
Range of Inch Threads (TPI)
3-1/2 - 80
Number of Inch Threads
38
Number of Metric Threads
23
Length of Gap (In.)
8
Range of Longitudinal Feeds (IPR)
.0018 - .0374
Swing Over Bed (In.)
13
Taper in Tailstock Spindle
MT-3
Number of Spindle Speeds
8
Spindle Taper with Sleeve
MT-5 (MT-3)
Drive
Geared Head
Compound Slide Travel (In.)
2-11/16
Spindle Bore (In.)
1-3/8
Spindle Mount
D1-4
Range of Spindle Speeds (RPM)
70 - 2,000
Tailstock Spindle Travel (In.)
3-3/4
Steady Rest Capacity (In.)
2-3/4
Weight (Lbs.)
1154
Range of Metric Threads
.45 - 10
Width of Bed (In.)
7-3/8
Carriage Travel (In.)
35
Overall Dimensions (L x W x H) (In.)
79 x 28-1/2 x 30
Max Tool Size (In.)
5/8 x 5/8
Swing Through Gap (In.)
18-3/4
Size
13 x 40
JET Bench Lathe, Series: GHB-1340A, 13 in Swing Over Bed, 7-25/32 in Swing Over Cross Slide, 43 in Distance Between Centers, 7-3/8 in Bed Width, #3 Morse Taper Tailstock Taper, #5 Morse Taper (#3 Morse Taper) Spindle, 70 to 2000 rpm Spindle Speed, 8 Spindle Speed, 6-5/16 in Cross Travel, 3-3/4 in Tailstock Spindle Travel, 35 in Carriage Travel, 2-11/16 in Compound Travel, 0.0006 to 0.013 in Maximum Cross Feed Rate per Revolution, 0.0018 to 0.0374 in Maximum Longitudinal Feed Rate per Revolution, 2 hp, 230 VAC, 79 x 28-1/2 x 30 in
Dimensions
- Length: 71 in
- Height: 47 in
- Width: 32 in
- Length: 106783 cu-in
Features
- Comes with an enclosed gear box
- Enclosed gear box design provides smooth, quiet operation
- Fast, easy speed changes
- Hardened and ground gears are featured in the headstock and gearbox
- D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
- Headstock is constantly oiled during operation
- Gear box gives wide inch threading and feed capabilities with no gear changes
- V-way bed design is induction hardened and ground
- Gap bed section provided for large diameter work
- Independent leadscrew and feed rod
- T-slotted compound slide featuring four-way tool post
- Carriage mounted spindle control lever
- Automatic feeding and threading are fully interlocked
- Feed selectors travel in grooved ways
- Tailstock may be offset for turning tapers and includes an inch metric graduated quill
- 6 in 3-jaw direct mount scroll chuck with top reversing jaws, 8 in 4-jaw independent chuck and 12 in faceplate
- Four-way tool post, steady and follow rest, metric change gear, centers and headstock center sleeves and threading dial
- 40 longitudinal/cross feed rates
- 23 metric threads
- 5/8 in x 5/8 in max tool size, 18-3/4 in swing through gap, 13 in swing over bed, 0.45 - 10 metric threads, 2-3/4 in steady rest capacity, 38 number of inch threads, D1-4 spindle mount, 2-3/8 in follow rest capacity, 1-3/8 in spindle bore, 3-1/2 - 80 TPI, 13 in x 40 in size, 8 in length, 230 V prewired
Application: For metalworking
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
