We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
JET 323130 BDB-1340A Lathe With Newall NMS300 DRO
MODEL 323130
Contact supplier for technical support on: 833 383 6800
OBSOLETE
Please call 888-671-2883 for Replacement info
Typically Ships in: 1 day
Returnable: Yes
Carriage Travel (In.)
35
Compound Slide Travel (In.)
2-11/16
Drive
Belt
Length of Gap (In.)
8
Max Tool Size (In.)
5/8 x 5/8
Motor (HP)
2 HP, 230V, 1Ph
Number of Inch Threads
38
Number of Longitudinal and Cross Feed Rates
38
Number of Metric Threads
23
Number of Spindle Speeds
12
Overall Dimensions (L x W x H) (In.)
71 x 32 x 45
Range of Cross Feeds (IPR)
0.0006-0.013
Range of Inch Threads (TPI)
3-1/2 - 80
Range of Longitudinal Feeds (IPR)
0.0018-0.0374
Range of Metric Threads
0.45-10
Range of Spindle Speeds (RPM)
60 - 1,240
Size
13 x 40
Spindle Bore (In.)
1-3/8
Spindle Mount
D1-4
Spindle Taper with Sleeve
MT-5 (MT-3)
Steady Rest Capacity (In.)
2-5/8
Style (Type)
Bench
Swing Over Bed (In.)
13
Swing Over Cross Slide (In.)
7-25/32
Swing Through Gap (In.)
18-3/4
Tailstock Spindle Travel (In.)
3-3/4
Taper in Tailstock Spindle
MT-3
Weight (Lbs.)
1175
Width of Bed (In.)
7-3/8
JET Bench Lathe, Belt Drive, Series: BDB-1340A, 13 in Swing Over Bed, 7-25/32 in Swing Over Cross Slide, 40 in Distance Between Centers, 7-3/8 in Bed Width, #3 Morse Taper Tailstock Taper, #5 Morse Taper (#3 Morse Taper) Spindle, 60 to 1240 rpm Spindle Speed, 12 Spindle Speed, 6-5/16 in Cross Travel, 3-3/4 in Tailstock Spindle Travel, 35 in Carriage Travel, 2-11/16 in Compound Travel, 0.0006 to 0.013 in Maximum Cross Feed Rate per Revolution, 0.0018 to 0.0374 in Maximum Longitudinal Feed Rate per Revolution, 2 hp, 230 VAC, 71 x 32 x 45 in
Features
- Comes with an enclosed gearbox as a standard feature
- Enclosed gear box design provides smooth, quiet operation
- Fast, easy speed changes
- Low voltage motor controls
- Helical cut headstock gears reduce noise
- Change gears allow metric threading
- Spindle is supported by precision tapered roller bearings
- V-way bed is induction hardened and ground
- Gap bed section provided for large diameter work
- Independent leadscrew and feed rod
- T-slotted compound slide featuring four-way tool post
- Carriage mounted spindle control lever
- Automatic feeding and threading are fully interlocked
- Feed selectors travel in grooved ways
- Tailstock may be offset for turning tapers and includes an inch metric graduated quill
- 6 in 3-jaw direct mount scroll chuck with top reversing jaws, 8 in 4-jaw independent chuck and 12 in faceplate
- Four-way tool post, steady and follow rest, metric change gear, centers and headstock center sleeves and threading dial
- 38 longitudinal/cross feed rates
- 23 metric threads
- 5/8 in x 5/8 in max tool size, 18-3/4 in swing through gap, 13 in swing over bed, 0.45 - 10 metric threads, 2-5/8 in steady rest capacity, 38 number of inch threads, D1-4 spindle mount, 2-3/4 in follow rest capacity, 1-3/8 in spindle bore, 3-1/2 - 80 TPI, 13 in x 40 in size, 8 in length
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read more
| Brand | Irwin Tools |
| Model | 3726ZR |
| Brand | ABB |
| Model | 4384B19A01 |
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read more