We never sell your data to third parties
TBWOODS 7JS 7JES EPDM SPLIT SF SLEEVE
MODEL 7JS
Contact supplier for technical support on: 888-829-6637
$44.52 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Returnable:No
Brand
TB Woods
Model
6JS
Brand
TB Woods
Model
5JS
Brand
TB Woods
Model
5J
Brand
TB Woods
Model
8JS
Component WR2 (lbs ft2)
0.0109
Component WR²
0.0109
Coupling size
7
Dimension (in) (D)
4 11/32
Dimension (in) (W)
2-3/16
Horsepower Rating at 100 RPM
8
Horsepower rating at 1150 RPM
8
Horsepower rating at 1200 RPM
8
Horsepower rating at 1750 RPM
8
Horsepower rating at 1800 RPM
9
Horsepower rating at 300 RPM
9
Horsepower rating at 3450 RPM
8
Horsepower rating at 3600 RPM
9
Horsepower rating at 50 RPM
9
Horsepower rating at 690 RPM
8
Horsepower rating at 870 RPM
8
Insert design
One-Piece Split
KW rating at 100 RPM
1.1
KW rating at 1450 RPM
16
KW rating at 3000 RPM
33
KW rating at 970 RPM
11
Material type
EPDM
Max angular gap misalignment
0.081 in
Max angular misalignment
1°
Max compatible bore size
1.875
Max parallel misalignment
6
Max RPM
5250
Max speed
5250
Maximum angular gap misalignment (in)
0.081
Maximum parallel misalignment (in)
0.02
Min compatible bore size
0.625
Operating temperature
-34°C to +135°C
Outside diameter
4.34375
Power rating at 100 RPM
1.1 kW
Screw type
Sleeve, One-Piece with Split
Sleeve width
2.1875
Stiffness
313
Stiffness (in lbs rad)
2769
Temperature rating
-30°F to 275°F
Temperature rating (F)
+275ºF to -30ºF
Torque
940 in-lb
Torque rate
940 in/lbs
Torque rating (in lbs)
725
Torsional stiffness
2769
Shaft Couplings and Collars The TB Woods 7JS EPDM Split Sure-Flex Sleeve is a high-performance coupling element designed to deliver superior flexibility and durability in power transmission applications. Constructed from high-quality EPDM rubber, this sleeve is engineered to withstand harsh operating conditions while providing excellent vibration dampening and shock absorption.
Key Features
| Material Composition | Made from advanced EPDM rubber, offering exceptional resistance to oils, heat, and ozone, ensuring long-term durability. |
|---|---|
| Design | Split sleeve design facilitates easy installation and maintenance, allowing for quick replacement without removing the entire coupling assembly. |
| Performance | Provides a torque range of up to 1, 200 in-lbs, making it suitable for a variety of industrial applications. |
| Compatibility | Specifically designed for use with TB Woods Sure-Flex coupling systems, ensuring optimal performance and fit. |
| Temperature Range | Operates effectively in a temperature range of -30°F to 200°F (-34°C to 93°C), making it ideal for diverse working environments. |
Applications
| Industrial Machinery | Ideal for coupling applications in conveyors, pumps, and fans across various sectors including food and beverage, energy, and material handling. |
|---|---|
| Compatibility | Works seamlessly with TB Woods Sure-Flex coupling series, ensuring reliable performance in power transmission systems. |
| Harsh Environments | Suitable for environments that require high resistance to chemicals and temperature fluctuations, enhancing operational reliability. |
Benefits
| Enhanced Flexibility | The elastomeric design allows for angular, parallel, and axial misalignment, minimizing wear and extending the life of the connected equipment. |
|---|---|
| Maintenance Savings | The split sleeve design reduces downtime and maintenance costs, enabling efficient operation and easy replacement. |
| Vibration Isolation | Effectively dampens vibrations, reducing stress on connected components and improving overall system performance. |
No questions match your search.
Which Sure-Flex Plus sleeve material should I choose: EPDM, Neoprene or Hytrel? This product
EPDM is the general purpose sleeve, rated -30°F to +275°F. Neoprene is the oil resistant, non-flame option, rated 0°F to +200°F. Both allow 1 degree of angular misalignment and wind up about 21 degrees at rated torque, which helps absorb shock. Hytrel is designed for high torque, with three times the relative rating of EPDM or Neoprene (3X against 1X) and a range of -65°F to +250°F. In exchange it winds up only about 7 degrees and allows 1/4 degree of angular misalignment. TB Woods says EPDM suits about 80 percent of applications: confirm the temperature with the end user, and follow the pump or compressor maker's specification where there is one.
How do I read Sure-Flex Plus part numbers like 8J, 9JS, 12, 9HS and 8SCH178? This product
Sleeve numbers give the coupling size, then the type. J is a one-piece EPDM sleeve (8J is an 8JE) and JS is one-piece split EPDM (9JS is a 9JES). A size alone is a two-piece EPDM sleeve with a wire ring (12 is a 12E). JN and JNS are the Neoprene one-piece versions, N is two-piece Neoprene, H is solid Hytrel and HS is two-piece Hytrel. A bore after the type means a flange or hub: 6S138 is a size 6 Type S flange with a 1-3/8" bore, and 8SCH178 a size 8 SC hub with 1-7/8". SCHS marks a short hub and MPB a plain bore. Numbers such as 663150 or 73300026 do not decode this way.
Can I replace an EPDM or Neoprene sleeve with Hytrel in my existing Sure-Flex coupling? This product
Not as a direct swap. TB Woods states that rubber (EPDM or Neoprene) and Hytrel sleeves have different ratings and must not be used interchangeably, or the sleeve will fail prematurely. H and HS sleeves fit only Type S, C and SC flanges, never Type J or B. H runs in sizes 6 to 12 and HS in sizes 6 to 14. Alignment limits are also tighter: a size 8 rubber sleeve allows 0.020" parallel and 0.094" angular, against 0.015" and 0.025" for Hytrel. Going to Hytrel means reselecting the coupling, not just the sleeve.
Will new Sure-Flex Plus sleeves fit my existing Sure-Flex flanges? This product
Yes. TB Woods describes the Sure-Flex Plus sleeve as fully compatible with the industry standard design it created over 50 years ago, and says it retrofits to existing flanges, so you do not need to replace the whole coupling. Keep the same size and check the type against your flange: J, JS, JN, JNS, E and N sleeves fit any flange within a given size, H and HS only Type S, C or SC. A worn sleeve can be sized by its outside diameter and width: a size 8 is 5-1/16" OD by 2-1/2" wide. The 30% torque increase applies to EPDM and Neoprene.
How do SC spacer hubs work on a Sure-Flex Plus coupling, and what is the difference between SCH and SCHS hubs? This product
On SC spacer couplings each side is a flange bolted to a separate hub (4JSC has an integral hub), with the cap screws furnished with the hub. The flange number sets the spacing: 9SC50 is for 5" between shafts. SCH is the standard hub, bored up to 3-7/8" on size 14. SCHS is a short hub with a smaller bore range, offered in sizes 6 to 13, and using one changes the assembled length and weight. Some flanges take a larger hub for bigger shafts: 9SC50-11 is a size 9 flange that takes an 11SCH or 11SCHS. Order flanges, hubs and sleeve separately.
Tb woods
Verified · SKU 337131Excelent recomiendo 100% Read more
Sales
Verified · SKU 337299I have all good experiences with your staff. Thank you for the support. Read more
Great service!
Verified · SKU 702627It was all sent perfectly and on time Read more
Sleeve
Verified · SKU 336870Thanks for quick service and delivery was not long! Read more
Brand
Dixon
Model
FMGR50F50F
Brand
SealMaster
Model
705411
Brand
U.S.Tsubaki
Model
H80SK17
Brand
U.S.Tsubaki
Model
H80BTL17
Brand
U.S.Tsubaki
Model
H80B25F-1
Brand
Cleveland
Model
C16724
Brand
U.S.Tsubaki
Model
H80B20F-2
Brand
Hubbell Wiring
Model
USB15A5GY
Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.