We never sell your data to third parties
Dodge 015244 Raptor 70HRB Couplings/Flex Clutch
MODEL 015244
Contact supplier for technical support on: +1-864-284-5700
$666.75 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Returnable:No
Brand
Leeson
Model
110041.00
Brand
WEG
Model
01018ET3E215T-W22
Brand
Dodge
Model
P2B-SC-100
Angular misalignment
2.0000, 2.0
Axial misalignment
0.3125 in, 7.938 mm
Bore dia max
4.5000 in
Bore length
3.6200 in, 91.948 mm
Component type
HUB
Coupling component
Hub
Coupling size
70
Coupling style
Split-tire
Coupling type
Elastomeric
Horsepower per 100 rat
35.1000 hp, 26.174 kW
Max RPM
3600
Max Speed
3600 RPM
Max temperature rating
220.0000 F, 104.444 C
Min temperature rating
-45.0000 F, -42.778 C
Parallel misalignment
0.1875 in, 4.763 mm
Product size
70
Rated Torque
22132.0000 lbf, 98448.041 N
Rated torque (lb/in)
22132
Shaft attachment
Rough bore
Size
70
Variant
HRB (Hub Rough Bore)
A better choice has arrived
Coupling maintenance and reliability should not consume your maintenance team's time. The Dodge Raptor elastomeric coupling is the answer to these concerns. The Raptor’s easy to assemble, patented split natural rubber element significantly decreases total costs of ownership and extends driven equipment life. Built for drop-in interchangeability, the Raptor features an innovative design offering easier installation, reduced maintenance, and improved reliability in a wide range of new and existing applications.
Superior natural rubber element
Leveraging over 50 years of Dodge’s natural rubber expertise, the Raptor features a natural rubber flexible element that offers a number of performance benefits when compared to competitive urethane designs.
- Industry leading misalignment capabilities
- Less vibration transmission to connected equipment
- Better shock absorbing capabilities
- Static conductive for grounding redundancy, allowing current to safely pass through the natural rubber element, preventing the possibility of arcing during operation
- Exceptional resistance to hydrolysis, for improved performance in humid environments
- Superior thermal conductivity and ability to dissipate heat and hysteresis build up
Patented WingLock™ element design
Dodge Raptor utilizes a patented finite-element optimized winged elastomeric element design. This WingLock technology increases surface area in the most critical regions of the element, resulting in higher bond strength, improved fatigue resistance, and longer life versus competitive designs.
Documented performance
Comparative benchmark testing confirms the performance improvements associated with Raptor’s WingLock element design. Even under worst-case misalignment and torque conditions, testing results show that Raptor lasts six times longer than the closest competitor. Results based on accelerated life testing at 1.5x cataloged torque, while subject to 4° angular misalignment and 3/16” (4.8mm) parallel misalignment.
A practical solution to spacer couplings
The innovation behind the Raptor coupling also extends to applications requiring additional space between shaft ends.
- One spacer element fits all standard ANSI and ISO spacer lengths.
- Spacer elements can be replaced with standard closecoupled elements, resulting in lower replacement costs and reduced inventory.
- Eliminates the need for high-speed rings, resulting in easier installation, while also reducing purchase costs and inventory requirements.
- Modular full spacer design can be converted for use in half spacer and close-coupled applications, providing opportunity for inventory consolidation
Armored elements for extra protection in harsh environments
Raptor couplings are available with an optional armored element. This allows users to benefit from the increased performance and longer driven equipment life of standard Raptor elements, while providing an added layer of protection from ozone, petroleum oils, and some chemical environments. Raptor armored elements exceed ASTM 1149-07 rubber deterioration standards, as determined through third-party testing.
Improved features, easier installation
The Dodge Raptor has everything needed for easier installations and reduced maintenance costs.
- Split element for easy replacement without moving and realigning connected equipment
- Slotted clamp ring holes offer 187% extra mounting hardware clearance versus competitor’s circular through holes.
- Approximately 50% lower torsional stiffness makes the element significantly easier to manipulate by hand during installation.
- Maintenance free non-lubricated natural rubber element for trouble-free operation
No questions match your search.
Is the Dodge Raptor coupling a drop-in for Rexnord Omega or TB Wood's Dura-Flex? This product
Yes, it was designed as one. Dodge states that Raptor meets or exceeds the torque, bore and speed ratings of those coupling styles and that all Raptor components can be used in existing applications without modification. Sizes map directly: Raptor E2 to E140 match Omega E2 to E140, and Raptor E2 to E80 match Dura-Flex WE2 to WE80. Raptor carries a 5-year limited warranty, which Dodge says applies even when it is used with competitors' components.
What do HSB, HCB, HRB, HTL, HQD and a trailing M mean on a Dodge Raptor hub? This product
Raptor hubs are named by size, H for hub, then style: SB is a stock finished bore, CB a custom finished bore, RB a rough bore, TL a Taper-Lock bushed hub and QD a QD bushed hub, so 20HSB is a size 20 stock bore hub. A trailing M, as on E2M elements and HRBM or HTLM hubs, marks the metric Raptor range (metric hardware, bores and keyways); metric hardware elements need hubs tapped for them, so keep M hubs with M elements. Inch finished bores are a clearance fit for sizes E2 to E60 and an interference fit for E70 to E140; heat those evenly to 350 F in an oven or oil bath, not with a torch.
Can I change a Raptor element without moving the motor or driven equipment? This product
Yes. The Raptor element is split horizontally, so it can be replaced without moving or realigning the connected equipment and without locking the shafts. Elements are sold separately from hubs by coupling size; for example the E3 standard element is 015844. Standard elements are natural rubber, and an optional Armored element adds protection from ozone, petroleum oils and some chemicals. Both are rated from -45 F to 220 F, with a service factor adjustment above 180 F.
What parts make up a complete Dodge Para-Flex (PX) coupling? This product
A complete Para-Flex coupling is two flange assemblies and one element, plus two bushings when bushed flanges are used. Flanges come bored-to-size, Taper-Lock (type H or type F flange assembly) or QD bushed (PX50 to PX200). Each size has a standard element and a neoprene element; for example PX90 uses element 011109 (standard) or 011300 (neoprene) and a 2517 Taper-Lock bushing. The range runs PX40 to PX320, rated from 429 to 453,000 in-lbs. PH series elements (PH87 to PH192) are typically used in high speed applications.
How much misalignment does a Para-Flex coupling take, and how do I know the element is worn? This product
Dodge rates Para-Flex for a combined 4 degrees angular, 1/8 in parallel and up to 5/16 in end float misalignment. The element has reinforced fabric tension cords that carry most of the torque and also act as a wear indicator, showing when the element should be replaced. The tire is reinforced at the split to reduce fatigue. Para-Flex couplings carry a 5-year limited warranty.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Perfect fit and finish
Verified · SKU 704413Good product, perfect fit and finish, good price and fast shipping. Thanks Read more
E20
Verified · SKU 2835296This is exactly what I needed. Price was way below my local business that carries couplings. Thanks. Read more
Oem parts
Verified · SKU 126926I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner. Read more
Great price/great product
Verified · SKU 117869Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect. Read more
Brand
Magnetics
Model
MRN060X0100X100
Brand
Bestorq
Model
12/C75
Brand
Bestorq
Model
9/C450
Brand
Dixon
Model
BN10F
Brand
Bestorq
Model
5/C450
Brand
AMI Bearings
Model
UCT311-35
Brand
Magnetics
Model
MRN060X0100X050
Brand
Bestorq
Model
11/C190
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/