We never sell your data to third parties
Grove Gear IronMan GR-BMQ818-10-R-140 (catalog GR8180159.00) 10:1 ratio single-reduction worm gear speed reducer with 1.75" center distance. Cast iron housing, 140TC quill flange input, 0.875" input diameter, 0.875" solid output shaft right hand. Motorized quill input design for right-angle power transmission.
MODEL GR8180159.00
Contact supplier for technical support on: 800-626-2120
$794.06 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Assembly
BMQ-R
Center Distance
1.8 In.
Center distance (in)
1.75
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/16-18 UNC
Height (in)
10.50
Housing material
Cast iron
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.875
Input Diameter (in)
0.875
Input Flange
143-5TC
Input HP
1.625
Input HP @ 1750 RPM
1.625
Input RPM
1750
Input Style
Quill
Keyway
3/16 X 3/32
Length (in)
10.69
Max OHL (Output Shaft)
1200
Max Thrust Load (Output Shaft)
976
Model Code
BMQ818
Motor Frame Size
140TC
Mounting Style
Base
No. of Gear Reductions
Single
Output
Right
Output Diameter (in)
0.875
Output HP
1.466
Output Key
3/16 X 1.38
Output RPM
175
Output Shaft Assembly Code
R
Output Shaft Direction
Right
Output Shaft Orientation
R
Output Style
R
Output Torque
528
Output Torque (lb-in)
528
Output Torque Range
500 to 1000 in lbs
Output type
Solid Shaft
Overhung Load
1200
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
10 to 1
Ratio Range
10-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BMQ-R
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
140TC
TAP Depth
0.63
Thrust Rating - output shaft
976
Width (in)
9.06
Regal Beloit Grove Gear&Reg; GR8180159.00
UPC: | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 10:1 Gear Ratio, 1.625 hp Input, 1.466 hp Output, C-Face Quill Input, Shaft Output, 7/8 in Dia Input, 0.875 in Dia x 2.05 in L Output, 175 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 528 in-lb Output, 1-3/4 in Centre Distance, 3/16 x 3/32 in Input, 0.1875 x 1.38 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 175 rpm |
| Centre Distance | 1-3/4 in |
| Input Type | C-Face Quill |
| Output Size | 0.875 in Dia x 2.05 in L |
| Input Size | 7/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 528 in-lb Output |
| Horsepower | 1.625 hp Input, 1.466 hp Output |
| Keyway Size | 3/16 x 3/32 in Input, 0.1875 x 1.38 in Output |
| Gear Ratio | 10:1 |
| Output Type | Shaft |
| Mounting Type | Base |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GR Series |
Packaging:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read more
#142034
Brand
Dodge
Model
23Q10R56
#141826
Brand
Dodge
Model
17Q10R14
#141874
Brand
Dodge
Model
20Q05R14
#142023
Brand
Dodge
Model
23Q05R56
#143024
Brand
Dodge
Model
17A10R14
#151721
Brand
Dodge
Model
23A10R56WP
#143251
Brand
Dodge
Model
23A10R56
#143706
Brand
Dodge
Model
40A10R21
| Brand | Ringspann |
| Model | 4867.200.501.130h74 |
| Brand | Omni-Fill |
| Model | B77761700 |
| Brand | WEG |
| Model | 00718ES1E215TC-W22 |
| Brand | Toshiba |
| Model | 0054XDSB42A-P |
| Brand | Toshiba |
| Model | 0052SDSR42A-P |
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read more