Image for Illustration purposes only. Actual product may vary
Grove Gear
GRG-BMQ826-60-R-140
60:1 Ratio, 0.875" Input Diameter, 1.25" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
Grove Gear GRG-BMQ826-60-R-140 60:1 Ratio, 0.875" Input Diameter, 1.25" Output Diameter, Right Angle Cast Iron Single-Reduction Worm ReducerMODEL GRG8260202.00
Contact supplier for technical support on: 262-878-1221
$1,110.61 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Still Deciding?
Add this item to your saved items and easily come back later.
Input Style
Quill
Reducer Type
Single
Ratio
60 to 1
Input Flange
140TC
Center Distance
2.6 In.
Paint/Coating
Blue
Output
Right
Output RPM
29
Output HP
0.835
Size
140TC
Output Key
1/4 X 1.75
Input Style
C-Face quill
Width (in)
12.25
Series Code
GRG
Output type
Solid Shaft
Overhung Load
1625
Model Code
BMQ826
Output Diameter (in)
1.250
Motor HP Rating
1
Assembly
BMQ-R
Shaft Seal Material
Viton
Input RPM
1750
Motor Frame Size
140
Center Distance Range
1" thru 3.25"
Housing material
Cast iron
Output Torque
1805
Product Type
Right Angle
Series Type
Cast Iron 800 Worm Gear Reducers
Output Torque Range
1000 to 2500 in lbs
Gear Drive Reductions
Single
Gear Type
Worm
Series Style
GRG-BMQ-R
Length (in)
16.00
Output Shaft Assembly Code
R
Reducer
Worm - Right Angle
Center distance (in)
2.63
Output Style
R
Reducer Style
Worm - Right Angle
No. of Gear Reductions
Single
Ratio Range
60-1
Height (in)
11.75
Product Line
GRG Series - Ironman Worm Gear Reducers
Output Shaft Direction
Right
Input HP
1.216
HP Range
1 to 1-1/2 (< 2)
Series
GRG Series - Ironman Worm Gear Reducers
Max OHL (Output Shaft)
1625
Mounting Style
No Base
Input HP @ 1750 RPM
1.216
Keyway
3/16 X 3/32
Input Diameter (in)
0.875
Input Bore (C Face)
0.875
Nominal Motor HP Rating to HP @ 1750 RPM
1
Service Factor
1
Output Shaft Orientation
R
Max Thrust Load (Output Shaft)
2091
Regal Beloit Grove Gear&Reg; GRG8260202.00
UPC: 690310042465 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GRG, 60:1 Gear Ratio, 1.216 hp Input, 0.835 hp Output, 1 hp Motor, C-Face Quill Input, Shaft Output, 7/8 in Dia Input, 1.25 in Dia x 2.73 in L Output, 29 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 1805 in-lb Output, 2.63 in Centre Distance, 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output Keyway, PAG Synthetic Oil Lubrication, No Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 29 rpm
- Centre Distance: 2.63 in
- Input Type: C-Face Quill
- Output Size: 1.25 in Dia x 2.73 in L
- Input Size: 7/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 1805 in-lb Output
- Horsepower: 1.216 hp Input, 0.835 hp Output, 1 hp Motor
- Keyway Size: 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output
- Gear Ratio: 60:1
- Output Type: Shaft
- Mounting Type: No Base
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GRG
Packaging:
- Length: 16.0 in
- Width: 12.25 in
- Height: 11.75 in
- Weight: 56.0 lb
Warranty:
Limited
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket