We never sell your data to third parties
Dodge 13Q25L56 TIGEAR-2 worm gear speed reducer, 25:1 ratio, quill input, left side solid output shaft, 56C flange, 1.33" center distance. Cast iron housing, 0.46 HP input, 311 in-lb output torque. Maintenance-free synthetic lubricant, ventless design, green paint.
MODEL 13Q25L56
Contact supplier for technical support on: +1-864-284-5700
$609.17 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#151610
Brand
Dodge
Model
13S10R
#148931
Brand
Dodge
Model
13S15L
#142800
Brand
Dodge
Model
13S07LR
#151623
Brand
Dodge
Model
13A05L56
Base to output center height
1.7100 in, 43.434 mm
Case size
13
Center Distance
1.33" case size 13
Center distance (in)
1.3 in, Center distance (in):1.3300 in, 33.782 mm
Center to end of shaft distance
4.0000 in, 101.6 mm
Finish
Green
Frame
56C NEMA flange
Gear Type
Worm gear, right-angle
Gearbox component type
Gearbox
Horsepower rating input
0.4600 hp, 0.343 kW
Horsepower rating output
0.3500 hp, 0.261 kW
Housing
Cast iron
Housing material
Cast iron
Input
Quill type
Input flange
56C
Input HP
0.46
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
3.2500 in, 82.55 mm
Mounting bolt pattern width
2.0000 in, 50.8 mm
Nominal ratio
25
Output
Left side solid shaft, 0.6250" diameter
Output bore/shaft diameter
0.625 in
Output horse power
0.35
Output shaft
Left (solid A)
Output shaft center to input motor mounting face distance
4.3900 in, 111.506 mm
Output style
Left
Overhung load
650 lbf, 2891.344 N
Paint type
Standard
Paint/coating
Green
Power Rating
0.46 HP input capacity
Rated torque output
311 in/lb, 311.0 in/lb
Ratio
25:1 reduction
Seal type
Single-lip contact
Shaft diameter output
0.6250 in, 15.875 mm
Shaft length output
1.9000 in, 48.26 mm
Suitable for washdown
No
Thermal horsepower rating
0.8600 hp, 0.641 kW
Torque
311 in-lb output torque
Specifications
- Catalog Number: 13Q25L56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 25:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 0.625"
- Input Style: Quill
- Frame: 56C
- Center Distance: 1.33"
- Case Size: 13
- Housing Material: Cast Iron
- Paint: Green
- Weight: 36.0000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#1327957
Brand
Electra/Grove Gear
Model
GR8130042.00
#1327993
Brand
Electra/Grove Gear
Model
GR8130078.00
#5999859
Brand
Winsmith
Model
U1325SL56
| Brand | Goulds |
| Model | AVA20050B0F0D0X1 |
| Brand | E-Z Lok |
| Model | EK31120 |
| Brand | Lubriplate |
| Model | L0351-098 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-W96330 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-546146 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-415102 |
| Brand | E-Z Lok |
| Model | SK20920 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/