We never sell your data to third parties
Dodge 15Q50R56 TIGEAR-2 worm gear speed reducer, 50:1 ratio, quill input, right side solid output shaft, 56C frame, 1.5" center distance. Cast iron housing with 0.75" output shaft diameter, rated 0.34 HP input. Totally enclosed, maintenance-free design with synthetic lubricant.
MODEL 15Q50R56
Contact supplier for technical support on: +1-864-284-5700
$743.47 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#151640
Brand
Dodge
Model
15A07L56
#5003833
Brand
Dodge
Model
15Q05L56LT
#142890
Brand
Dodge
Model
15S25R
#142888
Brand
Dodge
Model
15S25L
Base to output center height
1.8700 in, 47.498 mm
Case size
15
Center Distance
1.5" case size
Center distance (in)
1.5 in, Center distance (in):1.5000 in, 38.1 mm
Center to end of shaft distance
4.3100 in, 109.474 mm
Finish
Green
Frame
56C NEMA flange mount
Gear Type
Worm gear, single-worm
Gearbox component type
Gearbox
Horsepower rating input
0.3400 hp, 0.254 kW
Horsepower rating output
0.2200 hp, 0.164 kW
Housing
Cast iron
Housing material
Cast iron
Input
Quill input (integral shaft)
Input flange
56C
Input HP
0.34
Input style
Quill
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
35 rpm
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
3.5000 in, 88.9 mm
Mounting bolt pattern width
2.2500 in, 57.15 mm
Nominal ratio
50
Output
Right side solid shaft, 0.7500" diameter
Output bore/shaft diameter
0.75 in
Output horse power
0.22
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
4.4000 in, 111.76 mm
Output style
Right
Overhung load
710 lbf, 3158.237 N
Paint type
Standard
Paint/coating
Green
Power Rating
0.34 HP input
Rated torque output
402 in/lb, 402.0 in/lb
Ratio
50:1 reduction
Seal type
Single-lip contact
Shaft diameter output
0.7500 in, 19.05 mm
Shaft length output
2.2300 in, 56.642 mm
Suitable for washdown
No
Thermal horsepower rating
0.7000 hp, 0.522 kW
Torque Output
402 in-lb
Specifications
- Catalog Number: 15Q50R56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 50:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 0.75"
- Input Style: Quill
- Frame: 56C
- Center Distance: 1.5"
- Case Size: 15
- Housing Material: Cast Iron
- Paint: Green
- Weight: 22.0000 lb
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow should I store a Dodge gearbox over the off-season? This product
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands? This product
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#1328611
Brand
Electra/Grove Gear
Model
GR8150201.00
#141838
Brand
Dodge
Model
17Q05L14
#5821557
Brand
PT Coupling
Model
54110116P
#317413
Brand
SKF Bearing
Model
HMV 58E
#5821582
Brand
PT Coupling
Model
54120228
#317403
Brand
SKF Bearing
Model
HMV 11E
#1133484
Brand
MRC Bearing
Model
8008
#109588
Brand
Dixon
Model
F80-1
#2071166
Brand
Dixon
Model
DFC-10
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/