We never sell your data to third parties
Dodge 15S20LR TIGEAR-2 worm gear reducer, 20:1 ratio, 1.5" center distance, double solid output shaft, separate belt-driven input. Cast iron housing with synthetic lubricant. 0.75" output shafts. 0.5" input shaft. 0.7 HP input, 0.56 HP output. Green finish.
MODEL 15S20LR
Contact supplier for technical support on: +1-864-284-5700
$776.31 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
1.8700 in, 47.498 mm
Case size
15
Center Distance
1.5" compact
Center distance (in)
1.5 in, Center distance (in):1.5000 in, 38.1 mm
Center to end of shaft distance
4.3100 in, 109.474 mm
Finish
Green
Gear Type
Worm gear, right-angle
Gearbox component type
Gearbox
Horsepower rating input
0.7000 hp, 0.522 kW
Horsepower rating output
0.5600 hp, 0.418 kW
Housing
Cast iron
Housing material
Cast iron
Input
0.5 in Input Shaft
Input HP
0.7
Input style
Separate, Input style:Solid input shaft
Lubrication
Factory-filled synthetic lubricant
Lubrication type
PAG, standard temperature
Mounting bolt pattern length
3.5000 in, 88.9 mm
Mounting bolt pattern width
2.2500 in, 57.15 mm
Nominal ratio
20
Output
Double solid shafts (left and right), 0.75" diameter
Output bore/shaft diameter
0.75 in
Output horse power
0.56
Output shaft
Double (solid)
Output style
Left, right
Output Torque
407 in-lb maximum
Overhung load
710 lbf, 3158.237 N
Paint type
Standard
Paint/coating
Green
Power Rating
0.7 HP input capacity
Rated torque output
407 in/lb, 407.0 in/lb
Ratio
20:1 speed reduction
Seal type
Single-lip contact
Shaft dia input
0.5000 in
Shaft diameter output
0.7500 in, 19.05 mm
Shaft length input
1.1900 in, 30.226 mm
Shaft length output
2.2300 in, 56.642 mm
Suitable for washdown
No
Thermal horsepower rating
1.2600 hp, 0.94 kW
Specifications
- Catalog Number: 15S20LR
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 20:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 0.75"
- Input Style: Separate
- Center Distance: 1.5"
- Case Size: 15
- Housing Material: Cast Iron
- Paint: Green
- Weight: 22.0000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#142888
Brand
Dodge
Model
15S25L
#142890
Brand
Dodge
Model
15S25R
#142886
Brand
Dodge
Model
15S15LR
#142887
Brand
Dodge
Model
15S20L
#144244
Brand
Dodge
Model
1315MTR14
| Brand | Berliss |
| Model | BSP-359V SC SC |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/