We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 26Q05LR18WP TIGEAR-2 worm gear speed reducer, 5:1 ratio, quill input, double solid output shaft, 180TC frame, 2.6" center distance, 7.37 HP input, 1247 in-lb output torque, cast iron housing, white paint - Ratio: 5:1
- Center Distance: 2.6"
- Input: 180TC Flange
- Output Bore/Shaft Diameter: 1.25"
- Output: Double Solid Output Shaft
- Paint/Coating: White
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 7.37
- Output Horse Power: 6.93
MODEL 26Q05LR18WP
Contact supplier for technical support on: +1-864-284-5700
$1,732.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
White epoxy
Gearbox component type
Gearbox
Horsepower rating input
7.3700 hp, 5.496 kW
Horsepower rating output
6.9300 hp, 5.168 kW
Housing material
Cast iron
Input
180TC flange
Input flange
180TC
Input HP
7.37
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 180TC frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
5
Output
Double solid output shaft
Output bore/shaft diameter
1.25 in
Output horse power
6.93
Output shaft center to input motor mounting face distance
6.5200 in, 165.608 mm
Output style
Left, right
Overhung load
1330 lbf, 5916.135 N
Paint type
White epoxy
Paint/coating
White
Rated torque output
1247 in/lb, 1247.0 in/lb
Ratio
5 to 1
Seal type
Single-lip contact
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
No
Thermal horsepower rating
8.7900 hp, 6.555 kW
- Reducer Family: TIGEAR-2 worm gear speed reducer
- Gear Ratio: 5:1 reduction
- Input Type: Quill input design
- Output Configuration: Double solid output shaft (left + right)
- Motor Frame: 180TC flange compatibility
- Center Distance: 2.6" case size 26
- Power Rating: 7.37 HP input capacity
- Output Torque: 1,247 in-lb maximum
- Housing Material: Cast iron construction
- Paint Finish: White epoxy paint for washdown environments
- Weight: 50 lbs
- Applications: Belt conveyors, mixers, agitators, packaging equipment
SKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#5009496
Brand
Dodge
Model
26Q05L56WP
#153467
Brand
Dodge
Model
26QZ05R56WP
#144575
Brand
Dodge
Model
26QZ12LR56WP
#142646
Brand
Dodge
Model
26ZBASEWP
#144606
Brand
Dodge
Model
26QZ12L14WP
| Brand | Reiff & Nestor |
| Model | 84861 |
| Brand | E-Z Lok |
| Model | 30810 |
| Brand | Linn Gear |
| Model | 120-4C40 |
| Brand | Siemens Controls |
| Model | 6ES7307-1EA01-0AA0 |
SKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/