We never sell your data to third parties
Dodge 26AZ30L56WP TIGEAR-2 E-Z Kleen worm gear reducer with 30:1 ratio, 3-piece coupled input, left side solid output shaft, 56C flange, 2.6" center distance, cast iron housing, and white epoxy finish. 2 HP input, 1.58 HP output, 1.25" output shaft diameter. Designed for washdown environments with corrosion-resistant white epoxy coating and stainless steel hardware.
MODEL 26AZ30L56WP
Contact supplier for technical support on: +1-864-284-5700
$2,250.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center Distance
2.6" case size
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
White paint E-Z Kleen
Gearbox component type
Gearbox
Horsepower rating input
2.0000 hp, 1.491 kW
Horsepower rating output
1.5800 hp, 1.178 kW
Housing
Cast iron
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
2
Input style
3-Piece coupled
Input Style
3-piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Motor Frame
56C flange mounting
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
30
Output
Left side solid output shaft
Output bore/shaft diameter
1.25 in
Output Configuration
Left side solid shaft, 1.125" diameter
Output horse power
1.58
Output shaft center to input motor mounting face distance
8.6100 in, 218.694 mm
Output style
Left
Overhung load
1610 lbf, 7161.637 N
Paint type
White epoxy
Paint/coating
White
Power Rating
2 HP input, 1705 in-lb output torque
Rated torque output
1705 in/lb, 1705.0 in/lb
Ratio
30 to 1
Reduction Ratio
30:1
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
Yes
Thermal horsepower rating
2.7900 hp, 2.081 kW
Specifications
- Catalog Number: 26AZ30L56WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 30:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: 3-Piece Coupled
- Frame: 56C
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Cast Iron
- Paint: White
- Weight: 69.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#152098
Brand
Dodge
Model
26AZ05LR56WP
#144585
Brand
Dodge
Model
26QZ18R14WP
#153466
Brand
Dodge
Model
26AZ18LR14WP
#144577
Brand
Dodge
Model
26QZ12R56WP
#153467
Brand
Dodge
Model
26QZ05R56WP
| Brand | MROSupply Fasteners |
| Model | FSTPCK-452432 |
| Brand | Orbit Industries |
| Model | BAL400MHKIT |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/