We never sell your data to third parties
Dodge 35Q15L18WP TIGEAR-2 worm gear speed reducer with 15:1 ratio, quill input, left side solid output shaft, 180TC input flange, and 3.5" center distance. Cast iron housing with white epoxy paint finish. 7.44 HP input rating, 6.66 HP output, 1.5" output shaft diameter. Totally enclosed, ventless design with synthetic lubricant for maintenance-free operation in any mounting orientation.
MODEL 35Q15L18WP
Contact supplier for technical support on: +1-864-284-5700
$2,645.94 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
3.9900 in, 101.346 mm
Case size
35
Center Distance
3.5" (case size 35)
Center distance (in)
3.5 in, Center distance (in):3.5000 in, 88.9 mm
Center to end of shaft distance
7.0600 in, 179.324 mm
Finish
White epoxy
Gear Ratio
15:1 reduction ratio
Gearbox component type
Gearbox
Horsepower rating input
7.4400 hp, 5.548 kW
Horsepower rating output
6.6600 hp, 4.966 kW
Housing
Cast iron
Housing material
Cast iron
Input
180TC flange
Input Configuration
Quill input
Input flange
180TC
Input HP
7.44
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 180TC frame
Motor Frame
180TC C-face flange mount
Mounting bolt pattern length
7.5000 in, 190.5 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
15
Output
Left side solid output shaft
Output bore/shaft diameter
1.5 in
Output horse power
6.66
Output Shaft
Left side solid output shaft, 1.5000" diameter
Output shaft center to input motor mounting face distance
7.5500 in, 191.77 mm
Output style
Left
Output Torque
3, 599 in-lb maximum
Overhung load
2760 lbf, 12277.092 N
Paint type
White epoxy
Paint/coating
White
Power Rating
7.44 HP input capacity
Product Type
TIGEAR-2 Right Angle Worm Gear Speed Reducer
Rated torque output
3599 in/lb, 3599.0 in/lb
Ratio
15 to 1
Seal type
Single-lip contact
Shaft diameter output
1.5000 in, 38.1 mm
Shaft length output
3.5100 in, 89.154 mm
Suitable for washdown
No
Thermal horsepower rating
7.5600 hp, 5.637 kW
Specifications
- Catalog Number: 35Q15L18WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 15:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1.5"
- Input Style: Quill
- Frame: 180TC
- Center Distance: 3.5"
- Case Size: 35
- Housing Material: Cast Iron
- Paint: White
- Weight: 109.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#143622
Brand
Dodge
Model
35A30LR56WP
#5009973
Brand
Dodge
Model
35Q15L18SL408
#142648
Brand
Dodge
Model
35ZBASEWP
#143624
Brand
Dodge
Model
35A30R18WP
#143632
Brand
Dodge
Model
35A50L14WP
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/