We never sell your data to third parties
Dodge 35A40L18WP TIGEAR-2 worm gear speed reducer, 40:1 ratio, 3-piece coupled input, left side solid output shaft 1.5" diameter, 180TC flange, 3.5" center distance. Cast iron housing with white paint finish. 3.23 HP input capacity, 3,622 in-lb output - Ratio: 40:1
- Center Distance: 3.5"
- Input: 180TC Flange
- Output Bore/Shaft Diameter: 1.5"
- Output: Left Side Solid Output Shaft
- Paint/Coating: White
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 3.23
- Output Horse Power: 2.51
MODEL 35A40L18WP
Contact supplier for technical support on: +1-864-284-5700
$2,706.72 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
3.9900 in, 101.346 mm
Case size
35
Center Distance
3.5" (case size 35)
Center distance (in)
3.5 in, Center distance (in):3.5000 in, 88.9 mm
Center to end of shaft distance
7.0600 in, 179.324 mm
Finish
White epoxy
Frame Size
180TC NEMA C-face flange
Gear Type
Worm gear, right-angle
Gearbox component type
Gearbox
Horsepower rating input
3.2300 hp, 2.409 kW
Horsepower rating output
2.5100 hp, 1.872 kW
Housing material
Cast iron
Housing Material
Cast iron class 30
Input
180TC flange
Input flange
180TC
Input HP
3.23
Input style
3-Piece coupled
Input Style
3-piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 180TC frame
Mounting bolt pattern length
7.5000 in, 190.5 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
40
Output
Left side solid output shaft
Output bore/shaft diameter
1.5 in
Output Configuration
Left side solid output shaft, 1.5" diameter
Output horse power
2.51
Output shaft center to input motor mounting face distance
11.1500 in, 283.21 mm
Output style
Left
Overhung load
2760 lbf, 12277.092 N
Paint Finish
White paint
Paint type
White epoxy
Paint/coating
White
Power Rating
3.23 HP input capacity
Rated torque output
3622 in/lb, 3622.0 in/lb
Ratio
40 to 1
Reduction Ratio
40:1
Seal type
Single-lip contact
Shaft diameter output
1.5000 in, 38.1 mm
Shaft length output
3.5100 in, 89.154 mm
Suitable for washdown
No
Thermal horsepower rating
3.5400 hp, 2.64 kW
Torque Output
3, 622 in-lb maximum
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#143619
Brand
Dodge
Model
35A10R18WP
#143622
Brand
Dodge
Model
35A30LR56WP
#143632
Brand
Dodge
Model
35A50L14WP
#143626
Brand
Dodge
Model
35A40L56WP
#143615
Brand
Dodge
Model
35A10L18WP
| Brand | Orbit Industries |
| Model | GDB-1-MC-FB |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-493003 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-413004 |
| Brand | Vacon VFD |
| Model | OPT-D6-V |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/