We never sell your data to third parties
Dodge 13A10R56WP TIGEAR-2 right-angle worm gear speed reducer with 10:1 ratio, 3-piece coupled input, right side solid output shaft, 56C frame, and 1.33" center distance. Features a 0.625" output shaft diameter, cast iron housing, and white epoxy paint finish. Input horsepower 0.85, output horsepower 0.75. Suitable for Class I and II applications requiring right-angle speed reduction in a compact, maintenance-free design.
MODEL 13A10R56WP
Contact supplier for technical support on: +1-864-284-5700
$925.49 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#149078
Brand
Dodge
Model
13AZ20L56WP
#5003602
Brand
Dodge
Model
13A07R14WP
#152332
Brand
Dodge
Model
13QZ20L56WP
#142844
Brand
Dodge
Model
13A10R56WP
Base to output center height
1.7100 in, 43.434 mm
Capacity
0.85 HP input, 270 in-lb output torque
Case size
13
Center Distance
1.33" compact case size
Center distance (in)
1.3 in, Center distance (in):1.3300 in, 33.782 mm
Center to end of shaft distance
4.0000 in, 101.6 mm
Finish
White epoxy
Frame
56C NEMA motor flange
Gear Type
Right-angle worm gear
Gearbox component type
Gearbox
Horsepower rating input
0.8500 hp, 0.634 kW
Horsepower rating output
0.7500 hp, 0.559 kW
Housing
Cast iron
Housing material
Cast iron
Input
3-piece coupled
Input flange
56C
Input HP
0.85
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
3.2500 in, 82.55 mm
Mounting bolt pattern width
2.0000 in, 50.8 mm
Nominal ratio
10
Output
Right side solid shaft, 0.625" diameter
Output bore/shaft diameter
0.625 in
Output horse power
0.75
Output shaft center to input motor mounting face distance
7.2200 in, 183.388 mm
Output style
Right
Overhung load
650 lbf, 2891.344 N
Paint
White epoxy
Paint type
White epoxy
Paint/coating
White
Rated torque output
270 in/lb, 270.0 in/lb
Ratio
10:1 reduction
Seal type
Single-lip contact
Shaft diameter output
0.6250 in, 15.875 mm
Shaft length output
1.9000 in, 48.26 mm
Suitable for washdown
No
Thermal horsepower rating
1.9600 hp, 1.462 kW
Specifications
- Catalog Number: 13A10R56WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 10:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 0.625"
- Input Style: 3-Piece Coupled
- Frame: 56C
- Center Distance: 1.33"
- Case Size: 13
- Housing Material: Cast Iron
- Paint: White
- Weight: 39.0000 lb
How should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#1327966
Brand
Electra/Grove Gear
Model
GR8130051.00
#5999843
Brand
Winsmith
Model
U1310SR56
| Brand | BLACKSTAR |
| Model | BLS H41SH26 |
| Brand | Martin Sprocket |
| Model | 50SDS35 |
| Brand | BLACKSTAR |
| Model | BLS E 2 3/16 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/