We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 23A20L14 TIGEAR-2 worm gear speed reducer. 20:1 ratio, left side solid output shaft 1.125" diameter, 3-piece coupled input, 140TC frame, 2.3" center distance. Cast iron housing, green paint. 2 HP input, 1178 in-lb output torque. - Ratio: 20:1
- Center Distance: 2.3"
- Input: 140TC Flange
- Output Bore/Shaft Diameter: 1.25"
- Output: Left Side Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 2
- Output Horse Power: 1.64
MODEL 23A20L14
Contact supplier for technical support on: +1-864-284-5700
$1,256.32 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
2.5000 in, 63.5 mm
Case size
23
Center distance (in)
2.3 in, Center distance (in):2.3100 in, 58.674 mm
Center to end of shaft distance
5.1400 in, 130.556 mm
Finish
Green
Horsepower rating input
2.0000 hp, 1.491 kW
Horsepower rating output
1.6400 hp, 1.223 kW
Housing material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
2
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
20
Output
Left side solid output shaft
Output bore/shaft diameter
1.25 in
Output horse power
1.64
Output shaft
Left (solid A)
Output shaft center to input motor mounting face distance
8.5800 in, 217.932 mm
Output style
Left
Overhung load
1610 lbf, 7161.637 N
Paint type
Standard
Paint/coating
Green
Rated torque output
1178 in/lb, 1178.0 in/lb
Ratio
20 to 1
Seal type
Single-lip contact
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.1800 in, 55.372 mm
Suitable for washdown
No
Thermal horsepower rating
2.6200 hp, 1.954 kW
- Gear Type: Worm gear, right-angle configuration
- Ratio: 20:1 reduction
- Output Shaft: Left side solid, 1.125" diameter
- Input Type: 3-piece coupled for easy motor separation
- Frame Size: 140TC motor flange
- Center Distance: 2.3" for compact installation
- Capacity: 2 HP input, 1178 in-lb output torque
- Housing: Cast iron construction with green paint finish
- Weight: 59 lbs
- Applications: Belt conveyors, mixers, agitators requiring moderate reduction ratios
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#142645
Brand
Dodge
Model
23ZBASEWP
#151736
Brand
Dodge
Model
23A15L14
#143268
Brand
Dodge
Model
23A40L14
#143195
Brand
Dodge
Model
23A20L14WP
#143181
Brand
Dodge
Model
23A10LR14
#151388
Brand
Dodge
Model
23Q20L14
#141986
Brand
Dodge
Model
23Q20L14WP
#143195
Brand
Dodge
Model
23A20L14WP
#6000600
Brand
Winsmith
Model
U2420SL14
| Brand | Thomson Linear |
| Model | 511H30D0G1 |
| Brand | Fastube |
| Model | HDPE38-B |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/