We never sell your data to third parties
Dodge 26S05LRWP TIGEAR-2 worm gear speed reducer with 5:1 ratio, double solid output shaft, separate input, and 2.6" center distance. 1.25" output shaft diameter, 0.875" input shaft, 7.37 HP input, 6.93 HP output, 1247 in-lb output torque. Cast iron housing with white epoxy finish.
MODEL 26S05LRWP
Contact supplier for technical support on: +1-864-284-5700
$1,511.87 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#144632
Brand
Dodge
Model
26QZ30L56WP
#142658
Brand
Dodge
Model
26ZJMOUNTWP
#149095
Brand
Dodge
Model
26AZ12L56WP
#152110
Brand
Dodge
Model
26QZ05L56WP
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center Distance
2.6" case size 26
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
White epoxy
Gearbox component type
Gearbox
Horsepower rating input
7.3700 hp, 5.496 kW
Horsepower rating output
6.9300 hp, 5.168 kW
Housing
Cast iron
Housing material
Cast iron
HP Rating
7.37 HP input capacity
Input
0.875 in Input Shaft
Input HP
7.37
Input style
Separate, Input style:Solid input shaft
Lubrication type
PAG, standard temperature
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
5
Output
Double solid output shaft
Output bore/shaft diameter
1.25 in
Output horse power
6.93
Output style
Left, right
Output Torque
1, 247 in-lb
Overhung load
1330 lbf, 5916.135 N
Paint type
White epoxy
Paint/coating
White
Rated torque output
1247 in/lb, 1247.0 in/lb
Ratio
5:1 single reduction
Seal type
Single-lip contact
Shaft dia input
0.8750 in
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length input
1.1700 in, 29.718 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
No
Thermal horsepower rating
8.7900 hp, 6.555 kW
Specifications
- Catalog Number: 26S05LRWP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 5:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Separate
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Cast Iron
- Paint: White
- Weight: 50.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-604189 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-534256 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/