We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 26AZ12R56WP TIGEAR-2 E-Z Kleen worm gear speed reducer, 12:1 ratio, 3-piece coupled input, right side solid output shaft 1.1250" diameter, 56C frame, 2.6" center distance, 4.08 HP input, 1654 in-lb output torque, cast iron housing, white paint - Ratio: 12:1
- Center Distance: 2.6"
- Input: 56C Flange
- Output Bore/Shaft Diameter: 1.25"
- Output: Right Side Solid Output Shaft
- Paint/Coating: White
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 4.08
- Output Horse Power: 3.63
MODEL 26AZ12R56WP
Contact supplier for technical support on: +1-864-284-5700
$2,250.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
White epoxy
Gearbox component type
Gearbox
Horsepower rating input
4.0800 hp, 3.042 kW
Horsepower rating output
3.6300 hp, 2.707 kW
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
4.08
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
12
Output
Right side solid output shaft
Output bore/shaft diameter
1.25 in
Output horse power
3.63
Output shaft center to input motor mounting face distance
8.6100 in, 218.694 mm
Output style
Right
Overhung load
1610 lbf, 7161.637 N
Paint type
White epoxy
Paint/coating
White
Rated torque output
1654 in/lb, 1654.0 in/lb
Ratio
12 to 1
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
Yes
Thermal horsepower rating
4.7200 hp, 3.52 kW
- Gear Type: Right-angle worm gear design
- Reduction Ratio: 12:1
- Input: 3-piece coupled (AZ type) for easy motor separation
- Output: Right side solid shaft, 1.1250" diameter
- Frame: 56C NEMA C-face motor flange
- Center Distance: 2.6" (size 26 case)
- Power Rating: 4.08 HP input capacity
- Output Torque: 1654 in-lb
- Housing: Cast iron construction
- Finish: White epoxy paint for food/pharmaceutical/washdown applications
- Series: TIGEAR-2 E-Z Kleen for hygienic environments
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#153643
Brand
Dodge
Model
26QZ18LR14WP
#144632
Brand
Dodge
Model
26QZ30L56WP
#152098
Brand
Dodge
Model
26AZ05LR56WP
#5009663
Brand
Dodge
Model
26S18RWP
#144560
Brand
Dodge
Model
26AZ18LR56WP
| Brand | MROSupply Fasteners |
| Model | FSTPCK-019039 |
| Brand | Cutler Hammer |
| Model | E59-M12A105A01-A1 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/