$2,223.10 Each Prices subject to change
We never sell your data to third parties
Dodge 30A25H14 TIGEAR-2 worm gear speed reducer with 25:1 ratio, 3-piece coupled input, hollow bore output, and 140TC flange. 3" center distance, Class 30 grey iron housing with green paint finish. 3.05 HP input, 2.54 HP output, 70 rpm maximum, 1.9375" output bore diameter.
MODEL 30A25H14
Contact supplier for technical support on: +1-864-284-5700
$2,430.59 Each
Prices are subject to change
THIS ORDER SHIPS FREE
Select Quantity
Typically Ships in: 1 day
Returnable:No
#6001560
Brand
Winsmith
Model
U3025HT14
#144101
Brand
Dodge
Model
30A25H14
#144117
Brand
Dodge
Model
30A25H14WP
Base to output center height
3.2500 in, 82.55 mm
Bore dia output
1.9380 in, 49.225 mm
Bore length
7.7600 in, 197.104 mm
Case size
30
Center Distance
3" worm gear center distance
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Finish
Green
Frame Size
140TC NEMA C-face motor flange
Gear Ratio
25:1 reduction
Gearbox component type
Gearbox
Horsepower rating input
3.0500 hp, 2.274 kW
Horsepower rating output
2.5400 hp, 1.894 kW
Housing
Cast iron
Housing material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
3.05
Input style
3-Piece coupled
Input Type
3-piece coupled input
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
70 rpm
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
25
Output
Hollow bore output shaft, 1.9375" diameter
Output bore/shaft diameter
1.9375 in
Output horse power
2.54
Output shaft
Hollow
Output shaft center to input motor mounting face distance
9.2300 in, 234.442 mm
Output style
Hollow
Output Torque
2, 284 in-lb maximum torque
Overhung load
2300 lbf, 10230.91 N
Paint type
Standard
Paint/coating
Green
Power Rating
3.05 HP input capacity
Rated torque output
2284 in/lb, 2284.0 in/lb
Ratio
25 to 1
Reducer Family
TIGEAR-2 worm gear speed reducer
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
3.9000 hp, 2.908 kW
Specifications
- Catalog Number: 30A25H14
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 25:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 1.9375"
- Input Style: 3-Piece Coupled
- Frame: 140TC
- Center Distance: 3"
- Case Size: 30
- Housing Material: Cast Iron
- Paint: Green
- Weight: 95.0000 lb
SKU: 704413
Perfect fit and finish
Good product, perfect fit and finish, good price and fast shipping. Thanks
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow should I store a Dodge gearbox over the off-season? This product
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands? This product
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#6001560
Brand
Winsmith
Model
U3025HT14
#1240056
Brand
Gates Rubber
Model
CC173
SKU: 704413
Perfect fit and finish
Good product, perfect fit and finish, good price and fast shipping. Thanks
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/