We never sell your data to third parties
Dodge 30A07H14WP 30A07H14 TIGEAR-2 worm gear speed reducer with 7:1 ratio, 3-piece coupled input, hollow bore output, 140TC input flange, and 3" center distance. Class 30 grey iron cast iron housing with white epoxy paint finish. Input horsepower 8.74 HP, output horsepower 8.15 HP, maximum 233 rpm. Hollow bore diameter 1.9375". Suitable for right-angle power transmission in industrial applications.
MODEL 30A07H14WP
Contact supplier for technical support on: +1-864-284-5700
$2,433.22 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
3.2500 in, 82.55 mm
Bore dia output
1.9380 in, 49.225 mm
Bore length
7.7600 in, 197.104 mm
Case size
30
Center Distance
3" (case size 30)
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Finish
White epoxy
Gear Type
Right-angle worm gear
Gearbox component type
Gearbox
Horsepower rating input
8.7400 hp, 6.517 kW
Horsepower rating output
8.1500 hp, 6.077 kW
Housing material
Cast iron
Input
140TC flange
Input Configuration
3-piece coupled input
Input flange
140TC
Input HP
8.74
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
233 RPM
Motor compatibility
NEMA motor, 140TC frame
Motor Frame
140TC C-face flange mounting
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
7
Output
Hollow bore
Output bore/shaft diameter
1.9375 in
Output horse power
8.15
Output shaft center to input motor mounting face distance
9.2300 in, 234.442 mm
Output style
Hollow
Output Style
Hollow bore 1.9375" diameter
Output Torque
2171 in-lb
Overhung load
1540 lbf, 6850.261 N
Paint type
White epoxy
Paint/coating
White
Power Rating
8.74 HP input capacity
Rated torque output
2171 in/lb, 2171.0 in/lb
Ratio
7 to 1
Reduction Ratio
7:1
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
9.6400 hp, 7.189 kW
Specifications
- Catalog Number: 30A07H14WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 7:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 1.9375"
- Input Style: 3-Piece Coupled
- Frame: 140TC
- Center Distance: 3"
- Case Size: 30
- Housing Material: Cast Iron
- Paint: White
- Weight: 95.0000 lb
SKU: 704413
Perfect fit and finish
Good product, perfect fit and finish, good price and fast shipping. Thanks
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#6001400
Brand
Winsmith
Model
U3008HT14
#144105
Brand
Dodge
Model
30A07H14WP
#144095
Brand
Dodge
Model
30A07H14
#6001400
Brand
Winsmith
Model
U3008HT14
| Brand | Bestorq |
| Model | BX148 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-403310 |
SKU: 704413
Perfect fit and finish
Good product, perfect fit and finish, good price and fast shipping. Thanks
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/