We never sell your data to third parties
Dodge 30AZ10LR14WP TIGEAR-2 E-Z Kleen worm gear reducer with 10:1 ratio, 3-piece coupled input, double solid output shaft (1.375" diameter), and 140TC C-face flange. 3" center distance, white epoxy finish. Class 30 grey iron housing rated 7.11 HP input, 6.52 HP output, 175 rpm maximum. Suitable for washdown and food-grade environments.
MODEL 30AZ10LR14WP
Contact supplier for technical support on: +1-864-284-5700
$3,105.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#143514
Brand
Dodge
Model
30S05LRWP
#151801
Brand
Dodge
Model
30A05LR14WP
#142647
Brand
Dodge
Model
30ZBASEWP
#152129
Brand
Dodge
Model
30AZ15LR14WP
Base to output center height
3.2500 in, 82.55 mm
Case size
30
Center Distance
3" (30 case size)
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Center to end of shaft distance
6.7500 in, 171.45 mm
Finish
White epoxy
Gear Ratio
10:1 reduction
Gearbox component type
Gearbox
Horsepower rating input
7.1100 hp, 5.302 kW
Horsepower rating output
6.5200 hp, 4.862 kW
Housing material
Cast iron
Housing Material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
7.11
Input style
3-Piece coupled
Input Type
3-piece coupled (A designation)
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
175 rpm
Motor compatibility
NEMA motor, 140TC frame
Motor Frame
140TC C-face flange
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
10
Output
Double solid output shaft
Output bore/shaft diameter
1.375 in
Output Configuration
Double solid shaft (left & right), 1.375" diameter
Output horse power
6.52
Output shaft center to input motor mounting face distance
9.2300 in, 234.442 mm
Output style
Left, right
Overhung load
1720 lbf, 7650.941 N
Paint type
White epoxy
Paint/coating
White
Power Rating
7.11 HP input, 2347 in-lb output torque
Product Family
TIGEAR-2 E-Z Kleen worm gear reducer
Rated torque output
2347 in/lb, 2347.0 in/lb
Ratio
10 to 1
Seal type
Two-piece harsh duty
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
Yes
Thermal horsepower rating
7.8500 hp, 5.854 kW
Specifications
- Catalog Number: 30AZ10LR14WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 10:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 1.375"
- Input Style: 3-Piece Coupled
- Frame: 140TC
- Center Distance: 3"
- Case Size: 30
- Housing Material: Cast Iron
- Paint: White
- Weight: 95.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#5999547
Brand
Winsmith
Model
M3010SB14
| Brand | Allen Bradley |
| Model | 104-C16DJ22 |
| Brand | Lubriplate |
| Model | L0309-035 |
| Brand | Bosch Rexroth |
| Model | R902038550 |
| Brand | Bosch Rexroth |
| Model | R911312666 |
| Brand | Pearl Abrasives |
| Model | DIA6GRTE4 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/