We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 13AZ25LR56 TIGEAR-2 E-Z Kleen worm gear speed reducer with 25:1 ratio, double solid output shaft (0.6250" diameter), 3-piece coupled input, 56C frame, 1.33" center distance. Cast iron housing, 0.46 HP rating, 311 in-lb output torque. - Ratio: 25:1
- Center Distance: 1.3"
- Input: 56C Flange
- Output Bore/Shaft Diameter: 0.625"
- Output: Double Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 0.46
- Output Horse Power: 0.35
MODEL 13AZ25LR56
Contact supplier for technical support on: +1-864-284-5700
$1,324.70 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
1.7100 in, 43.434 mm
Case size
13
Center distance (in)
1.3 in, Center distance (in):1.3300 in, 33.782 mm
Center to end of shaft distance
4.0000 in, 101.6 mm
Finish
Silver-gray epoxy
Gearbox component type
Gearbox
Horsepower rating input
0.4600 hp, 0.343 kW
Horsepower rating output
0.3500 hp, 0.261 kW
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
0.46
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
3.2500 in, 82.55 mm
Mounting bolt pattern width
2.0000 in, 50.8 mm
Nominal ratio
25
Output
Double solid output shaft
Output bore/shaft diameter
0.625 in
Output horse power
0.35
Output shaft
Double (solid)
Output shaft center to input motor mounting face distance
7.2200 in, 183.388 mm
Output style
Left, right
Overhung load
650 lbf, 2891.344 N
Paint type
Stainless epoxy
Paint/coating
Green
Rated torque output
311 in/lb, 311.0 in/lb
Ratio
25 to 1
Seal type
Two-piece harsh duty
Shaft diameter output
0.6250 in, 15.875 mm
Shaft length output
1.9000 in, 48.26 mm
Suitable for washdown
Yes
Thermal horsepower rating
0.8600 hp, 0.641 kW
- Reducer Type: TIGEAR-2 E-Z Kleen right-angle worm gear speed reducer
- Ratio: 25:1 reduction ratio
- Output Configuration: Double solid output shaft, 0.6250" (15.875 mm) diameter
- Input Type: 3-piece coupled input for easy motor separation
- Frame: 56C NEMA C-face motor flange
- Center Distance: 1.33" (case size 13)
- Power Rating: 0.46 HP input capacity
- Torque Output: 311 in-lb maximum output torque
- Housing: Cast iron construction with green paint finish
- Applications: Food processing, washdown environments, general industrial drives requiring sanitary design
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#152196
Brand
Dodge
Model
13QZ25LR56
#144845
Brand
Dodge
Model
13QZ10R56
#144383
Brand
Dodge
Model
13AZ05R56
#144816
Brand
Dodge
Model
13AZ50L56
#144850
Brand
Dodge
Model
13QZ25L56
#152196
Brand
Dodge
Model
13QZ25LR56
#145269
Brand
Dodge
Model
13AZ25LR56WP
#145327
Brand
Dodge
Model
13QZ25LR56WP
#5998408
Brand
Winsmith
Model
M1325SB56
| Brand | SKF Bearing |
| Model | SI 40 ES-2RS |
| Brand | SMC |
| Model | MXQA-DS20 |
| Brand | SMC |
| Model | KA00065 |
| Brand | Dixon |
| Model | 200DWSPAL |
| Brand | Timken Belts |
| Model | R5V800-4 |
| Brand | Allen Bradley |
| Model | 1336F-B060 |
| Brand | FK Bearing |
| Model | HJMXL7T |
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/