We never sell your data to third parties
Dodge 17AZ15LR56 15:1 Ratio Double Solid Output Shaft 56C Flange 1.7" Center Distance Green Paint
MODEL 17AZ15LR56
Contact supplier for technical support on: +1-864-284-5700
$1,667.54 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Returnable:No
#144362
Brand
Dodge
Model
17QZ07L56
#152206
Brand
Dodge
Model
17AZ07LR14
#144892
Brand
Dodge
Model
17AZ10L14
#144367
Brand
Dodge
Model
17QZ10LR14
Base to output center height
1.9900 in, 50.546 mm
Case size
17
Center Distance
1.7" worm to gear centerline
Center distance (in)
1.7 in, Center distance (in):1.7500 in, 44.45 mm
Center to end of shaft distance
4.3100 in, 109.474 mm
Finish
Silver-gray epoxy
Frame
56C NEMA motor flange
Gear Type
Worm gear, right-angle
Gearbox component type
Gearbox
Horsepower rating input
1.2700 hp, 0.947 kW
Horsepower rating output
1.0800 hp, 0.805 kW
Housing
Cast iron construction, ventless
Housing material
Cast iron
Input
3-piece coupled (AZ)
Input flange
56C
Input HP
1.27
Input style
3-Piece coupled
Lubrication
Factory-filled synthetic lubricant
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
4.1900 in, 106.426 mm
Mounting bolt pattern width
2.7500 in, 69.85 mm
Nominal ratio
15
Output
Double solid output shaft
Output bore/shaft diameter
0.875 in
Output horse power
1.08
Output shaft
Double (solid)
Output Shaft
0.8750" diameter keyed shafts
Output shaft center to input motor mounting face distance
7.7300 in, 196.342 mm
Output style
Left, right
Overhung load
1190 lbf, 5293.384 N
Paint type
Stainless epoxy
Paint/coating
Green
Power Rating
1.27 HP input capacity
Rated torque output
583 in/lb, 583.0 in/lb
Ratio
15 to 1
Reduction Ratio
15:1
Seal type
Two-piece harsh duty
Shaft diameter output
0.8750 in, 22.225 mm
Shaft length output
1.7400 in, 44.196 mm
Suitable for washdown
Yes
Thermal horsepower rating
2.0100 hp, 1.499 kW
Torque Output
583 in-lb maximum
Speed Reducers The Dodge 17AZ15LR56 is a high-quality speed reducer designed for enhanced performance in various industrial applications. This double solid output shaft speed reducer features a robust 15:1 gear ratio and is engineered for durability and efficiency. Built with precision, the 56C flange and a center distance of 1.7 inches make it an ideal choice for heavy-duty operations, ensuring reliable power transmission and minimal maintenance requirements.
Key Features
| 15 | 1 Gear Ratio: Optimizes torque output while reducing speed, making it suitable for demanding applications where power control is essential. |
|---|---|
| Double Solid Output Shaft | Ensures strength and stability, providing enhanced resistance to wear and tear in high-load environments. |
| 56C Flange Design | Facilitates easy mounting and integration into existing systems, ensuring compatibility with standard setups. |
| Center Distance of 1.7 inches | This precise measurement allows for effective spacing in various configurations, improving overall system efficiency. |
| Green Paint Finish | The corrosion-resistant coating enhances durability and longevity, making it suitable for both indoor and outdoor applications. |
Applications
| Industrial Machinery | Ideal for conveyors, mixers, and other equipment requiring precise speed control and torque multiplication. |
|---|---|
| Automotive Systems | Perfect for applications in automotive manufacturing where power transmission and reliability are key. |
| Construction Equipment | Suitable for heavy machinery that demands robust performance and minimal downtime. |
Benefits
| Enhanced Efficiency | The high gear ratio minimizes energy loss, leading to lower operational costs and increased system efficiency. |
|---|---|
| Durability | Designed to withstand rigorous conditions, reducing the need for frequent replacements and lowering maintenance costs. |
| Versatile Compatibility | The standard flange and dimensions make it easy to integrate into various existing setups, ensuring seamless operation across different machinery. |
How should I store a Dodge gearbox over the off-season? This product
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands? This product
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
Perfect fit and finish
Verified · SKU 704413Good product, perfect fit and finish, good price and fast shipping. Thanks Read more
E20
Verified · SKU 2835296This is exactly what I needed. Price was way below my local business that carries couplings. Thanks. Read more
Oem parts
Verified · SKU 126926I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner. Read more
Great price/great product
Verified · SKU 117869Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect. Read more
#5998473
Brand
Winsmith
Model
M1815SB56
#2381206
Brand
System Plast
Model
VG-685-SS-8-07
#2381186
Brand
System Plast
Model
VG-685-SS-2-10
#2310815
Brand
Alemite
Model
317811-2
#524808
Brand
Rexnord
Model
174-671861
#2382426
Brand
System Plast
Model
VG-223-58-01
#2382445
Brand
System Plast
Model
VG-223RN-12-01
#2381124
Brand
System Plast
Model
VG-684-SS-6-04
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/