We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 30QZ10R14 TIGEAR-2 worm gear speed reducer with 10:1 ratio, 3" center distance, right side solid output shaft, 140TC flange, quill input. Cast iron housing, E-Z Kleen washdown design. 7.11 HP input rating, 2347 in-lb output torque. - Ratio: 10:1
- Center Distance: 3"
- Input: 140TC Flange
- Output Bore/Shaft Diameter: 1.375"
- Output: Right Side Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 7.11
- Output Horse Power: 6.52
MODEL 30QZ10R14
Contact supplier for technical support on: +1-864-284-5700
$2,374.51 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
3.2500 in, 82.55 mm
Case size
30
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Center to end of shaft distance
6.7500 in, 171.45 mm
Finish
Silver-gray epoxy
Gearbox component type
Gearbox
Horsepower rating input
7.1100 hp, 5.302 kW
Horsepower rating output
6.5200 hp, 4.862 kW
Housing material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
7.11
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
10
Output
Right side solid output shaft
Output bore/shaft diameter
1.375 in
Output horse power
6.52
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
6.1100 in, 155.194 mm
Output style
Right
Overhung load
1720 lbf, 7650.941 N
Paint type
Stainless epoxy
Paint/coating
Green
Rated torque output
2347 in/lb, 2347.0 in/lb
Ratio
10 to 1
Seal type
Two-piece harsh duty
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
Yes
Thermal horsepower rating
7.8500 hp, 5.854 kW
- Ratio: 10:1 single reduction
- Center Distance: 3" (case size 30)
- Output Shaft: Right side solid, 1.3750" diameter (34.925 mm)
- Input Type: Quill input (most compact design)
- Motor Flange: 140TC C-face
- Power Rating: 7.11 HP input capacity
- Torque Output: 2347 in-lb
- Housing: Cast iron construction with E-Z Kleen white epoxy finish
- Design: Totally enclosed, ventless, maintenance-free operation
- Applications: Food processing, pharmaceutical, washdown environments requiring sanitary design
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#5009809
Brand
Dodge
Model
30Q20L14FH
#146530
Brand
Dodge
Model
H6C18S03060
#146481
Brand
Dodge
Model
H3C56S05830
#5009771
Brand
Dodge
Model
30A20L14SB
#5009763
Brand
Dodge
Model
30A15L18FH
#144661
Brand
Dodge
Model
30QZ10R14WP
#152128
Brand
Dodge
Model
30AZ10R14WP
#152286
Brand
Dodge
Model
30AZ10R14
#5999553
Brand
Winsmith
Model
M3010SR14
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/