We never sell your data to third parties
Dodge 30AZ30L14 30:1 Ratio Left Side Solid Output Shaft 140TC Flange 3" Center Distance Green Paint
MODEL 30AZ30L14
Contact supplier for technical support on: +1-864-284-5700
$2,925.27 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Returnable:No
Brand
Dodge
Model
30AZ40R56
Brand
Dodge
Model
30AZ20LR56
Brand
Dodge
Model
30AZ20L56
Brand
Dodge
Model
30AZ07R14
Base to output center height
3.2500 in, 82.55 mm
Capacity
2.75 HP input, 2417 in-lb output torque
Case size
30
Center Distance
3" (size 30)
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Center to end of shaft distance
6.7500 in, 171.45 mm
Finish
Silver-gray epoxy
Frame
140TC motor flange
Gear Type
Worm gear, right-angle
Gearbox component type
Gearbox
Horsepower rating input
2.7500 hp, 2.051 kW
Horsepower rating output
2.2400 hp, 1.67 kW
Housing
Cast iron
Housing material
Cast iron
Input
3-piece coupled (AZ designation)
Input flange
140TC
Input HP
2.75
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
58 rpm
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
30
Output
Left side solid shaft, 1.3750" diameter
Output bore/shaft diameter
1.375 in
Output horse power
2.24
Output shaft
Left (solid A)
Output shaft center to input motor mounting face distance
9.2300 in, 234.442 mm
Output style
Left
Overhung load
2300 lbf, 10230.91 N
Paint type
Stainless epoxy
Paint/coating
Green
Rated torque output
2417 in/lb, 2417.0 in/lb
Ratio
30:1 reduction
Seal type
Two-piece harsh duty
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
Yes
Thermal horsepower rating
3.5800 hp, 2.67 kW
Speed Reducers The Dodge 30AZ30L14 is a high-quality speed reducer designed for efficiency and durability in various industrial applications. This 3-piece coupled input-output shaft features a left worm gear configuration, providing an optimal 30:1 gear ratio that ensures powerful torque transmission while reducing speed. Engineered with precision, the solid output shaft is compatible with the 140TC flange, making it an ideal choice for demanding environments.
Key Features
| 30 | 1 Gear Ratio: Provides significant speed reduction while enhancing torque output for optimal performance. |
|---|---|
| Solid Output Shaft | Constructed for strength and reliability, ensuring consistent operation under load. |
| 140TC Flange Compatibility | Designed to fit seamlessly with existing systems, simplifying installation and maintenance. |
| 3-Piece Coupled Design | Facilitates easy assembly and disassembly, allowing for straightforward maintenance and repairs. |
| Green Paint Finish | Offers enhanced visibility and protection against corrosion in various operating conditions. |
Applications
| Industrial Machinery | Perfect for use in conveyor systems, mixers, and other equipment requiring reliable speed reduction. |
|---|---|
| Agricultural Equipment | Suitable for various farming machinery where torque and speed control is crucial. |
| Automotive Applications | Ideal for modifications in performance vehicles, providing enhanced power transfer and efficiency. |
Benefits
| Enhanced Performance | The high gear ratio maximizes torque while minimizing wear and tear on connected components. |
|---|---|
| Reliability | Built to withstand rigorous operational demands, ensuring longevity and consistent performance. |
| Versatility | Compatible with a wide range of applications, making it a flexible solution for various industrial needs. |
How should I store a Dodge gearbox over the off-season? This product
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands? This product
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
Perfect fit and finish
Verified · SKU 704413Good product, perfect fit and finish, good price and fast shipping. Thanks Read more
E20
Verified · SKU 2835296This is exactly what I needed. Price was way below my local business that carries couplings. Thanks. Read more
Oem parts
Verified · SKU 126926I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner. Read more
Great price/great product
Verified · SKU 117869Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect. Read more
Brand
Winsmith
Model
M3030SL14
Brand
Berliss
Model
C183120
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/