We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 20QZ05H56 TIGEAR-2 E-Z Kleen worm gear speed reducer, 5:1 ratio, quill input, hollow bore output, 56C flange, 2" center distance. Cast iron housing, 3.47 HP rating, 581 in-lb output torque. Food-grade white epoxy finish. - Ratio: 5:1
- Center Distance: 2"
- Input: 56C Flange
- Output Bore/Shaft Diameter: 1.25"
- Output: Hollow Bore
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 3.47
- Output Horse Power: 3.23
MODEL 20QZ05H56
Contact supplier for technical support on: +1-864-284-5700
$1,804.02 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.2400 in, 56.896 mm
Bore dia output
1.2500 in, 31.75 mm
Bore length
5.7000 in, 144.78 mm
Case size
20
Center distance (in)
2 in, Center distance (in):2.0000 in, 50.8 mm
Finish
Silver-gray epoxy
Horsepower rating input
3.4700 hp, 2.588 kW
Horsepower rating output
3.2300 hp, 2.409 kW
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
3.47
Input style
Quill
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
350 rpm
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
5
Output
Hollow bore
Output bore/shaft diameter
1.25 in
Output horse power
3.23
Output shaft
Hollow
Output shaft center to input motor mounting face distance
5.0000 in, 127.0 mm
Output style
Hollow
Overhung load
1380 lbf, 6138.546 N
Paint type
Stainless epoxy
Paint/coating
Green
Rated torque output
581 in/lb, 581.0 in/lb
Ratio
5 to 1
Seal type
Two-piece harsh duty
Suitable for washdown
Yes
Thermal horsepower rating
4.9000 hp, 3.654 kW
- Gear Type: Worm gear, right-angle configuration
- Ratio: 5:1 speed reduction
- Input: Quill type, most compact design
- Output: Hollow bore, 1.25" diameter
- Frame: 56C NEMA C-face flange mounting
- Center Distance: 2" case size 20
- Power Rating: 3.47 HP input capacity
- Output Torque: 581 in-lb maximum
- Housing: Cast iron construction
- Special Features: E-Z Kleen food-grade design with white epoxy coating and FDA-compliant seals
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
| Brand | Winsmith |
| Model | E17MDNS41000EK |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/