We never sell your data to third parties
Dodge 26QZ30R56 TIGEAR-2 E-Z Kleen worm gear speed reducer with 30:1 ratio, quill input, right side solid output shaft, 56C flange, and 2.6" center distance. Cast iron housing with green paint, 2 HP input capacity, 1.58 HP output, and 1.25" output shaft diameter. Silver-gray epoxy finish for corrosion resistance in washdown environments.
MODEL 26QZ30R56
Contact supplier for technical support on: +1-864-284-5700
$1,953.21 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Capacity
2 HP input, 1705 in-lb output torque
Case size
26
Center Distance
2.6" (case size 26)
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
Silver-gray epoxy
Frame
56C motor flange
Gear Type
Worm gear, right-angle
Gearbox component type
Gearbox
Horsepower rating input
2.0000 hp, 1.491 kW
Horsepower rating output
1.5800 hp, 1.178 kW
Housing
Cast iron
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
2
Input style
Quill
Input Style
Quill input
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
30
Output
Right side solid output shaft, 1.125" diameter
Output bore/shaft diameter
1.25 in
Output horse power
1.58
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
5.4900 in, 139.446 mm
Output style
Right
Overhung load
1610 lbf, 7161.637 N
Paint type
Stainless epoxy
Paint/coating
Green
Rated torque output
1705 in/lb, 1705.0 in/lb
Ratio
30 to 1
Reduction Ratio
30:1
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
Yes
Thermal horsepower rating
2.7900 hp, 2.081 kW
Specifications
- Catalog Number: 26QZ30R56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 30:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Quill
- Frame: 56C
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Cast Iron
- Paint: Green
- Weight: 65.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read more
#153640
Brand
Dodge
Model
26QZ05L14
#152266
Brand
Dodge
Model
26QZ18L56
#152257
Brand
Dodge
Model
26AZ30L56
#142641
Brand
Dodge
Model
26ZBASE
#152253
Brand
Dodge
Model
26AZ18LR56
#152116
Brand
Dodge
Model
26AZ30R56WP
#144634
Brand
Dodge
Model
26QZ30R56WP
#144388
Brand
Dodge
Model
26AZ30R56
#5999315
Brand
Winsmith
Model
M2630SR56
| Brand | Pramet |
| Model | 6756660 |
| Brand | U.S. Seal Mfg. |
| Model | USP-SMPKGCUT |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-311061 |
| Brand | Telemecanique |
| Model | XS530B1NAM12 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/