We never sell your data to third parties
Dodge 26QZ30H14 TIGEAR-2 E-Z Kleen worm gear speed reducer with 30:1 ratio, 2.6" center distance, quill input, hollow bore output, and 140TC flange. Cast iron housing with green paint, 2 HP input, 1.58 HP output, and 1.4375" output bore. Food-grade E-Z Kleen design for washdown environments.
MODEL 26QZ30H14
Contact supplier for technical support on: +1-864-284-5700
$2,557.54 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Bore dia output
1.4380 in, 36.525 mm
Bore length
6.6200 in, 168.148 mm
Case size
26
Center Distance
2.6" compact case size
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Construction
Cast iron housing
Finish
Silver-gray epoxy
Gear Type
Right-angle worm gear
Gearbox component type
Gearbox
Horsepower rating input
2.0000 hp, 1.491 kW
Horsepower rating output
1.5800 hp, 1.178 kW
Housing material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
2
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
30
Output
Hollow bore
Output bore/shaft diameter
1.4375 in
Output horse power
1.58
Output shaft
Hollow
Output shaft center to input motor mounting face distance
5.4900 in, 139.446 mm
Output style
Hollow
Output Style
Hollow bore 1.4375" diameter
Overhung load
1610 lbf, 7161.637 N
Paint type
Stainless epoxy
Paint/coating
Green
Power Rating
2 HP input capacity
Rated torque output
1705 in/lb, 1705.0 in/lb
Ratio
30 to 1
Reduction Ratio
30:1 single reduction
Seal type
Two-piece harsh duty
Special Features
E-Z Kleen food-grade
Suitable for washdown
Yes
Thermal horsepower rating
2.7900 hp, 2.081 kW
Torque Output
1705 in-lb maximum
Specifications
- Catalog Number: 26QZ30H14
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 30:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 1.4375"
- Input Style: Quill
- Frame: 140TC
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Cast Iron
- Paint: Green
- Weight: 65.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#152444
Brand
Dodge
Model
26QZ30H14WP
#145768
Brand
Dodge
Model
26AZ30H14
#145934
Brand
Dodge
Model
26QZ30H14
#152435
Brand
Dodge
Model
26AZ30H14WP
#5999296
Brand
Winsmith
Model
M2630HM14
#145768
Brand
Dodge
Model
26AZ30H14
#152444
Brand
Dodge
Model
26QZ30H14WP
#152435
Brand
Dodge
Model
26AZ30H14WP
#5999296
Brand
Winsmith
Model
M2630HM14
| Brand | MBT Meltblown |
| Model | GSMF150S-1 |
| Brand | Martin Sprocket |
| Model | CMES2063X25L4 |
| Brand | Nachi Bearing |
| Model | 6209C3 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/