$1,754.73 Each Prices subject to change
We never sell your data to third parties
Dodge 30Q15R18 TIGEAR-2 worm gear speed reducer with 15:1 ratio, 3" center distance, right side solid output shaft, quill input, and 180TC flange. Class 30 grey iron housing with green paint. Rated for 5 HP input, 4.39 HP output, and 117 rpm maximum output speed. 1.375" output shaft diameter. Suitable for industrial power transmission applications requiring right-angle speed reduction.
MODEL 30Q15R18
Contact supplier for technical support on: +1-864-284-5700
$1,918.51 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#145144
Brand
Dodge
Model
30QZ07R18
#5009743
Brand
Dodge
Model
30A05R18FH
#152518
Brand
Dodge
Model
30QZ40H56
#152295
Brand
Dodge
Model
30QZ20LR18
Base to output center height
3.2500 in, 82.55 mm
Case size
30
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Center to end of shaft distance
6.7500 in, 171.45 mm
Finish
Green
Gear Type
Single-worm right angle
Gearbox component type
Gearbox
Horsepower rating input
5.0000 hp, 3.728 kW
Horsepower rating output
4.3900 hp, 3.274 kW
Housing
Cast iron
Housing material
Cast iron
HP Rating
5 HP input
Input
Quill input, 180TC motor flange
Input flange
180TC
Input HP
5
Input style
Quill
Lubrication
Factory filled synthetic lubricant
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
117 rpm
Motor compatibility
NEMA motor, 180TC frame
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
15
Output
Right side solid shaft, 1.3750" diameter
Output bore/shaft diameter
1.375 in
Output horse power
4.39
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
7.1400 in, 181.356 mm
Output style
Right
Overhung load
2300 lbf, 10230.91 N
Paint type
Standard
Paint/coating
Green
Rated torque output
2371 in/lb, 2371.0 in/lb
Ratio
15:1 reduction
Seal type
Single-lip contact
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
No
Thermal horsepower rating
5.7200 hp, 4.265 kW
Torque Rating
2, 371 in-lb output
Specifications
- Catalog Number: 30Q15R18
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 15:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.375"
- Input Style: Quill
- Frame: 180TC
- Center Distance: 3"
- Case Size: 30
- Housing Material: Cast Iron
- Paint: Green
- Weight: 89.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow should I store a Dodge gearbox over the off-season? This product
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands? This product
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#1331662
Brand
Electra/Grove Gear
Model
GR8300124.00
#6001497
Brand
Winsmith
Model
U3015SR18
#114074
Brand
Dixon
Model
STR35001
#5954558
Brand
Bestorq
Model
B82LG
#2239606
Brand
Gates Rubber
Model
AT10-890-50
#2187713
Brand
U.S. Seal Mfg.
Model
VGFS-4002
#2023034
Brand
Timken Belts
Model
1922V363
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/