We never sell your data to third parties
Dodge 26AZ12L56WP TIGEAR-2 E-Z Kleen worm gear speed reducer with 12:1 ratio, 3-piece coupled input, left side solid output shaft 1.25" diameter, 56C flange, 2.6" center distance, cast iron housing, white epoxy finish. Input HP 4.08, output HP 3.63. E-Z Kleen corrosion-resistant design with white epoxy paint and stainless steel hardware for washdown environments. Totally enclosed, ventless, maintenance-free with synthetic lubricant.
MODEL 26AZ12L56WP
Contact supplier for technical support on: +1-864-284-5700
$2,250.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center Distance
2.6" case size
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
White epoxy
Gear Ratio
12:1 reduction ratio
Gearbox component type
Gearbox
Horsepower rating input
4.0800 hp, 3.042 kW
Horsepower rating output
3.6300 hp, 2.707 kW
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
4.08
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Motor Frame
56C flange compatibility
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
12
Output
Left side solid output shaft, 1.1250" diameter
Output bore/shaft diameter
1.25 in
Output horse power
3.63
Output shaft center to input motor mounting face distance
8.6100 in, 218.694 mm
Output style
Left
Overhung load
1610 lbf, 7161.637 N
Paint type
White epoxy
Paint/coating
White
Performance
4.08 HP input rating, 1654 in/lb output torque
Rated torque output
1654 in/lb, 1654.0 in/lb
Ratio
12 to 1
Reducer Type
TIGEAR-2 E-Z Kleen right-angle worm gear speed reducer
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
Yes
Thermal horsepower rating
4.7200 hp, 3.52 kW
Specifications
- Catalog Number: 26AZ12L56WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 12:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: 3-Piece Coupled
- Frame: 56C
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Cast Iron
- Paint: White
- Weight: 69.0000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#149058
Brand
Dodge
Model
26QZ18LR56WP
#152098
Brand
Dodge
Model
26AZ05LR56WP
#153643
Brand
Dodge
Model
26QZ18LR14WP
#149095
Brand
Dodge
Model
26AZ12L56WP
#145464
Brand
Dodge
Model
26AZ12R56WP
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/