We never sell your data to third parties
Dodge 26QZ12L14 TIGEAR-2 worm gear speed reducer with 12:1 ratio, quill input, left side solid output shaft, 140TC flange, and 2.6" center distance. Cast iron housing with green paint, 4.08 HP input rating, 3.63 HP output, and 1.25" output shaft diameter. Silver-gray epoxy finish for corrosion resistance in washdown environments.
MODEL 26QZ12L14
Contact supplier for technical support on: +1-864-284-5700
$1,953.21 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center Distance
2.6" worm gear spacing
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Design
E-Z Kleen variant
Finish
Silver-gray epoxy
Frame
140TC NEMA flange
Gearbox component type
Gearbox
Horsepower rating input
4.0800 hp, 3.042 kW
Horsepower rating output
3.6300 hp, 2.707 kW
Housing
Cast iron
Housing material
Cast iron
HP Rating
4.08 HP input capacity
Input
140TC flange
Input flange
140TC
Input HP
4.08
Input style
Quill
Input Type
Quill input
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
12
Output
Left side solid output shaft, 1.1250" diameter
Output bore/shaft diameter
1.25 in
Output horse power
3.63
Output shaft
Left (solid A)
Output shaft center to input motor mounting face distance
5.4900 in, 139.446 mm
Output style
Left
Output Torque
1654 in-lb
Overhung load
1610 lbf, 7161.637 N
Paint type
Stainless epoxy
Paint/coating
Green
Rated torque output
1654 in/lb, 1654.0 in/lb
Ratio
12:1 reduction
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
Yes
Thermal horsepower rating
4.7200 hp, 3.52 kW
Specifications
- Catalog Number: 26QZ12L14
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 12:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Quill
- Frame: 140TC
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Cast Iron
- Paint: Green
- Weight: 65.0000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#142641
Brand
Dodge
Model
26ZBASE
#153640
Brand
Dodge
Model
26QZ05L14
#152257
Brand
Dodge
Model
26AZ30L56
#152266
Brand
Dodge
Model
26QZ18L56
#142652
Brand
Dodge
Model
26ZJMOUNT
| Brand | Fenner Industrial Motion |
| Model | B402300 |
| Brand | Rollway |
| Model | 6314 2RS C3 EMQ |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/