We never sell your data to third parties
Dodge 20Q25R56WP 20Q25R56 TIGEAR-2 worm gear speed reducer with 25:1 ratio, 2" center distance, quill input, right side solid output shaft, 56C flange, and white epoxy finish. Class 30 grey iron cast iron housing. Maximum 70 rpm output speed, 1.11 HP input, 0.88 HP output, 1" output shaft diameter. Suitable for food-grade washdown applications.
MODEL 20Q25R56WP
Contact supplier for technical support on: +1-864-284-5700
$1,024.26 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#149909
Brand
Dodge
Model
202Q10L56WP
#151568
Brand
Dodge
Model
20ZBASEWP
#5004241
Brand
Dodge
Model
20Q18L14WP
#149746
Brand
Dodge
Model
20QZ12L14WP
Base to output center height
2.2400 in, 56.896 mm
Case size
20
Center Distance
2"
Center distance (in)
2 in, Center distance (in):2.0000 in, 50.8 mm
Center to end of shaft distance
4.6900 in, 119.126 mm
Finish
White epoxy
Frame
56C NEMA C-face motor flange
Gear Type
Right-angle worm gear reducer
Horsepower rating input
1.1100 hp, 0.828 kW
Horsepower rating output
0.8800 hp, 0.656 kW
Housing
Cast iron
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
1.11
Input style
Quill
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
70 rpm
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
25
Output
Right side solid output shaft, 1.0000" diameter
Output bore/shaft diameter
1 in
Output horse power
0.88
Output shaft center to input motor mounting face distance
5.0000 in, 127.0 mm
Output style
Right
Output Torque
788 in-lb
Overhung load
1560 lbf, 6939.226 N
Paint type
White epoxy
Paint/coating
White
Power Rating
1.11 HP input capacity
Rated torque output
788 in/lb, 788.0 in/lb
Ratio
25:1 reduction
Seal type
Single-lip contact
Shaft diameter output
1.0000 in, 25.4 mm
Shaft length output
2.1100 in, 53.594 mm
Suitable for washdown
No
Thermal horsepower rating
1.5900 hp, 1.186 kW
Specifications
- Catalog Number: 20Q25R56WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 25:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1"
- Input Style: Quill
- Frame: 56C
- Center Distance: 2"
- Case Size: 20
- Housing Material: Cast Iron
- Paint: White
- Weight: 30.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreSKU: 117869
Awesome transaction
Great company to do business with. Transaction went smooth and quick!
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#43882
Brand
Boston Gear
Model
QC721-25-B5-J
#2414775
Brand
Winsmith
Model
E20CDTS31000D4
#1344474
Brand
Electra/Grove Gear
Model
NH8210054.00
#1339572
Brand
Electra/Grove Gear
Model
GRG8210126.00
#1341536
Brand
Electra/Grove Gear
Model
GRL8210054.00
#2288237
Brand
Browning
Model
1012665
#1341608
Brand
Electra/Grove Gear
Model
GRL8210126.00
#6000281
Brand
Winsmith
Model
U2025SR56
| Brand | E-Z Lok |
| Model | SK20415 |
| Brand | BLACKSTAR |
| Model | BLS E 3 5/16 STL |
| Brand | E-Z Lok |
| Model | EK20520 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-216060 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreSKU: 117869
Awesome transaction
Great company to do business with. Transaction went smooth and quick!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/