We never sell your data to third parties
Dodge 20S30L TIGEAR-2 worm gear speed reducer with 30:1 ratio, 2" center distance, solid input shaft, left side solid output shaft, 1" output diameter, 0.96 HP input, 0.74 HP output, 58 rpm maximum, Class 30 grey iron cast iron housing, green paint.
MODEL 20S30L
Contact supplier for technical support on: +1-864-284-5700
$837.09 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#149454
Brand
Dodge
Model
20Q20R56
#141884
Brand
Dodge
Model
20Q40L56
#121615
Brand
Dodge
Model
206619
#5004019
Brand
Dodge
Model
202A20R14
Base to output center height
2.2400 in, 56.896 mm
Case size
20
Center Distance
2" (case size 20)
Center distance (in)
2 in, Center distance (in):2.0000 in, 50.8 mm
Center to end of shaft distance
4.6900 in, 119.126 mm
Construction
Cast iron housing
Finish
Green
Gear Type
Worm gear, right-angle
Horsepower rating input
0.9600 hp, 0.716 kW
Horsepower rating output
0.7400 hp, 0.552 kW
Housing material
Cast iron
Input
0.625 in Input Shaft
Input HP
0.96
Input style
Separate, Input style:Solid input shaft
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
58 rpm
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
30
Output
Left side solid output shaft, 1.0" diameter
Output bore/shaft diameter
1 in
Output horse power
0.74
Output shaft
Left (solid A)
Output style
Left
Overhung load
1560 lbf, 6939.226 N
Paint type
Standard
Paint/coating
Green
Power Rating
0.96 HP input capacity
Rated torque output
802 in/lb, 802.0 in/lb
Ratio
30:1 reduction
Seal type
Single-lip contact
Shaft dia input
0.6250 in
Shaft diameter output
1.0000 in, 25.4 mm
Shaft length input
1.1500 in, 29.21 mm
Shaft length output
2.1100 in, 53.594 mm
Suitable for washdown
No
Thermal horsepower rating
1.4900 hp, 1.111 kW
Torque
802 in-lb output torque
Specifications
- Catalog Number: 20S30L
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 30:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1"
- Input Style: Separate
- Center Distance: 2"
- Case Size: 20
- Housing Material: Cast Iron
- Paint: Green
- Weight: 30.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#42397
Brand
Boston Gear
Model
721-30-G
#2415469
Brand
Winsmith
Model
E20XDTS4X000EK
#2298965
Brand
Morse
Model
XE1007
#1265989
Brand
HubCity
Model
0220-76910
#6000300
Brand
Winsmith
Model
U2030SL00
| Brand | MROSupply Fasteners |
| Model | FSTPCK-797816 |
| Brand | PIP |
| Model | KS993KOA/XL |
| Brand | VORTEX |
| Model | VOR V237-60-56C-LR |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/