We never sell your data to third parties
Dodge 30A05LR14WP 30A05LR14 TIGEAR-2 worm gear reducer with 5:1 ratio, 3-piece coupled input, double solid output shaft, 140TC flange, 3" center distance, 10.84 HP input, 10.27 HP output, 1.375" output shaft diameter, cast iron housing, white epoxy finish.
MODEL 30A05LR14WP
Contact supplier for technical support on: +1-864-284-5700
$2,188.72 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
3.2500 in, 82.55 mm
Case size
30
Center Distance
3.0 inches
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Center to end of shaft distance
6.7500 in, 171.45 mm
Finish
White epoxy
Gear Type
Right-angle worm gear
Gearbox component type
Gearbox
Horsepower rating input
10.8400 hp, 8.083 kW
Horsepower rating output
10.2700 hp, 7.658 kW
Housing material
Cast iron
Input
3-piece coupled
Input flange
140TC
Input HP
10.84
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Motor Flange
140TC C-face
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
5
Output
Double solid output shaft
Output bore/shaft diameter
1.375 in
Output horse power
10.27
Output shaft center to input motor mounting face distance
9.2300 in, 234.442 mm
Output Shaft Diameter
1.3750 in
Output style
Left, right
Output Torque
1, 849 in-lb
Overhung load
1330 lbf, 5916.135 N
Paint type
White epoxy
Paint/coating
White
Power Rating
10.84 HP input capacity
Rated torque output
1849 in/lb, 1849.0 in/lb
Ratio
5 to 1
Reduction Ratio
5:1
Seal type
Single-lip contact
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
No
Thermal horsepower rating
12.5300 hp, 9.344 kW
Specifications
- Catalog Number: 30A05LR14WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 5:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 1.375"
- Input Style: 3-Piece Coupled
- Frame: 140TC
- Center Distance: 3"
- Case Size: 30
- Housing Material: Cast Iron
- Paint: White
- Weight: 95.0000 lb
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#144661
Brand
Dodge
Model
30QZ10R14WP
#144620
Brand
Dodge
Model
30AZ10L18WP
#153423
Brand
Dodge
Model
30ZJMOUNTWP
#144684
Brand
Dodge
Model
30AZ50L14WP
#143514
Brand
Dodge
Model
30S05LRWP
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/