We never sell your data to third parties
Dodge 30A10LR14WP 30A10LR14 TIGEAR-2 worm gear speed reducer, 10:1 ratio, 3-piece coupled input, double solid output shaft, 140TC flange, 3" center distance, cast iron housing, white epoxy finish. 7.11 HP input, 6.52 HP output, 175 rpm maximum, 1.375" output shaft diameter. Class 30 grey iron construction for industrial power transmission applications.
MODEL 30A10LR14WP
Contact supplier for technical support on: +1-864-284-5700
$2,188.72 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#151801
Brand
Dodge
Model
30A05LR14WP
#144661
Brand
Dodge
Model
30QZ10R14WP
#152125
Brand
Dodge
Model
30AZ05L18WP
#145719
Brand
Dodge
Model
30QZ05H18WP
Base to output center height
3.2500 in, 82.55 mm
Case size
30
Center Distance
3.0" worm gear spacing
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Center to end of shaft distance
6.7500 in, 171.45 mm
Finish
White paint
Gear Ratio
10:1 reduction
Gearbox component type
Gearbox
Horsepower rating input
7.1100 hp, 5.302 kW
Horsepower rating output
6.5200 hp, 4.862 kW
Housing
Cast iron
Housing material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
7.11
Input style
3-Piece coupled
Input Type
3-piece coupled
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
175 rpm
Motor compatibility
NEMA motor, 140TC frame
Motor Frame
140TC NEMA C-face flange
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
10
Output
Double solid output shaft
Output bore/shaft diameter
1.375 in
Output horse power
6.52
Output shaft center to input motor mounting face distance
9.2300 in, 234.442 mm
Output Shaft Diameter
1.3750"
Output style
Left, right
Overhung load
1720 lbf, 7650.941 N
Paint type
White epoxy
Paint/coating
White
Performance
7.11 HP input capacity, 2347 in-lb output torque
Product Family
TIGEAR-2 right-angle worm gear reducer
Rated torque output
2347 in/lb, 2347.0 in/lb
Ratio
10 to 1
Seal type
Single-lip contact
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
No
Thermal horsepower rating
7.8500 hp, 5.854 kW
Specifications
- Catalog Number: 30A10LR14WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 10:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 1.375"
- Input Style: 3-Piece Coupled
- Frame: 140TC
- Center Distance: 3"
- Case Size: 30
- Housing Material: Cast Iron
- Paint: White
- Weight: 95.0000 lb
SKU: 791479
Great customer service
ITEMS WERE IN STOCK, QUICK DELIVERY AND GREAT CUSTOMER SERVICE.
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#1331781
Brand
Electra/Grove Gear
Model
GR8300243.00
#6001448
Brand
Winsmith
Model
U3010SB14
| Brand | G & G |
| Model | 149-2100 |
| Brand | VORTEX |
| Model | VOR SMRY5-TA |
| Brand | Gates Rubber |
| Model | 14MGT-8260EL-37 |
| Brand | Gates Rubber |
| Model | 4.25X3.00-IDL-FLAT |
SKU: 791479
Great customer service
ITEMS WERE IN STOCK, QUICK DELIVERY AND GREAT CUSTOMER SERVICE.
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/