We never sell your data to third parties
Dodge 23AZ10R14WP TIGEAR-2 E-Z Kleen worm gear reducer with 10:1 ratio, 3-piece coupled input, right side solid output shaft, 140TC flange, and 2.3" center distance. White epoxy paint finish on cast iron housing. Rated 3.42 HP input, 3.07 HP output, with 1.25" output shaft diameter. Ideal for washdown and food-grade environments requiring corrosion resistance.
MODEL 23AZ10R14WP
Contact supplier for technical support on: +1-864-284-5700
$1,884.14 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.5000 in, 63.5 mm
Case size
23
Center Distance
2.3" worm gear geometry
Center distance (in)
2.3 in, Center distance (in):2.3100 in, 58.674 mm
Center to end of shaft distance
5.1400 in, 130.556 mm
Finish
White epoxy
Frame
NEMA 140TC C-face motor flange
Horsepower rating input
3.4200 hp, 2.55 kW
Horsepower rating output
3.0700 hp, 2.289 kW
Housing material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
3.42
Input style
3-Piece coupled
Input Type
3-piece coupled (AZ generation)
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
10
Output
Right side solid shaft, 1.1250" diameter
Output bore/shaft diameter
1.25 in
Output horse power
3.07
Output shaft center to input motor mounting face distance
8.5800 in, 217.932 mm
Output style
Right
Output Torque
1, 106 in-lb maximum
Overhung load
1610 lbf, 7161.637 N
Paint type
White epoxy
Paint/coating
White
Power Rating
3.42 HP input capacity
Rated torque output
1106 in/lb, 1106.0 in/lb
Ratio
10:1 reduction
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.1800 in, 55.372 mm
Suitable for washdown
Yes
Thermal horsepower rating
4.4000 hp, 3.281 kW
Specifications
- Catalog Number: 23AZ10R14WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 10:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: 3-Piece Coupled
- Frame: 140TC
- Center Distance: 2.3"
- Case Size: 23
- Housing Material: Cast Iron
- Paint: White
- Weight: 59.0000 lb
SKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#5007584
Brand
Dodge
Model
232Q15L14WP
#5009233
Brand
Dodge
Model
23Q12LR56WP
#142645
Brand
Dodge
Model
23ZBASEWP
#144477
Brand
Dodge
Model
23AZ10R18WP
#5009315
Brand
Dodge
Model
23QZ12L56WP
#5998861
Brand
Winsmith
Model
M2410SR14
| Brand | United Abrasives |
| Model | 61108 |
| Brand | Marathon Electric |
| Model | E566 |
| Brand | TB Woods |
| Model | 259014M65W |
| Brand | SKF Bearing |
| Model | NU 2222 ECML |
SKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/