We never sell your data to third parties
Dodge 23QZ12L56WP TIGEAR-2 worm gear speed reducer with 12:1 ratio, left side solid output shaft, 1.25" shaft diameter, 56C flange input, 2.3" center distance, cast iron housing, white paint. Input horsepower 2.91, output horsepower 2.56. Quill input design for compact motor mounting. Totally enclosed, ventless, maintenance-free construction with synthetic lubricant. Suitable for right-angle power transmission in industrial applications.
MODEL 23QZ12L56WP
Contact supplier for technical support on: +1-864-284-5700
$1,507.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#5007570
Brand
Dodge
Model
232Q07L18WP
#5009321
Brand
Dodge
Model
23QZ30R14LTWP
#152087
Brand
Dodge
Model
23AZ10R14WP
#5007574
Brand
Dodge
Model
232Q07R18WP
Base to output center height
2.5000 in, 63.5 mm
Case size
23
Center Distance
2.3" (case size 23)
Center distance (in)
2.3 in, Center distance (in):2.3100 in, 58.674 mm
Center to end of shaft distance
5.1400 in, 130.556 mm
Frame
56C NEMA frame compatibility
Gear Type
Right angle worm gear
Horsepower rating input
2.9100 hp, 2.17 kW
Horsepower rating output
2.5600 hp, 1.909 kW
Housing material
Cast iron
HP Rating
2.91 HP input capacity
Input
Quill input
Input HP
2.91
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
12
Output
Left side solid output shaft, 1.1250" diameter
Output bore/shaft diameter
1.25 in
Output horse power
2.56
Output shaft center to input motor mounting face distance
5.4600 in, 138.684 mm
Output style
Left
Overhung load
1610 lbf, 7161.637 N
Paint
White epoxy finish
Paint type
White epoxy
Paint/coating
White
Rated torque output
1170 in/lb, 1170.0 in/lb
Ratio
12:1 reduction
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.1800 in, 55.372 mm
Suitable for washdown
Yes
Thermal horsepower rating
3.7800 hp, 2.819 kW
Torque Rating
1170 in-lb output torque capacity
Specifications
- Catalog Number: 23QZ12L56WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 12:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Quill
- Frame: 56C
- Center Distance: 2.3"
- Case Size: 23
- Housing Material: Cast Iron
- Paint: White
- Weight: 55.0000 lb
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
| Brand | Turck |
| Model | BI2-G08-AN6X |
| Brand | SKF Bearing |
| Model | GEC 320 DS/C3 |
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/