We never sell your data to third parties
Dodge SS26Q40LR56 TIGEAR-2 stainless steel worm gear reducer, 40:1 ratio, quill input, double solid output shafts, 56C flange, 2.6" center distance. 1.55 HP input, 1.17 HP output, 1.25" output shaft diameter. Totally enclosed ventless design with cast stainless steel housing for corrosion resistance in washdown environments. Maintenance-free operation with synthetic lubricant fill.
MODEL SS26Q40LR56
Contact supplier for technical support on: +1-864-284-5700
$2,904.06 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#2248955
Brand
Dodge
Model
SS26Q60L14
#5011600
Brand
Dodge
Model
SS26A12L18
#2248960
Brand
Dodge
Model
SS26Q60R56
#2248903
Brand
Dodge
Model
SS26Q20LR14
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center Distance
2.6 inch worm gear spacing
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Frame
56C motor flange
Gearbox component type
Gearbox
Horsepower rating input
1.5500 hp, 1.156 kW
Horsepower rating output
1.1700 hp, 0.872 kW
Housing
Stainless steel
Housing material
Stainless steel
Input
Quill input
Input HP
1.55
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
0.3800 in, 9.652 mm
Mounting bolt pattern width
6.3800 in, 162.052 mm
Nominal ratio
40
Output
Double solid output shaft
Output bore/shaft diameter
1.25 in
Output horse power
1.17
Output shaft center to input motor mounting face distance
5.5100 in, 139.954 mm
Output style
Left, right
Output Torque
1, 685 in-lb
Overhung load
1610 lbf, 7161.637 N
Paint/coating
No
Power Rating
1.55 HP input capacity
Rated torque output
1685 in/lb, 1685.0 in/lb
Ratio
40:1 reduction
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
Yes
Thermal horsepower rating
2.1400 hp, 1.596 kW
Specifications
- Catalog Number: SS26Q40LR56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 40:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Quill
- Frame: 56C
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Stainless Steel
- Paint: Green
- Weight: 65.0000 lb
How should I store a Dodge gearbox over the off-season? This product
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands? This product
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
Shaft
Verified · SKU 593147Worked well to repair Dodge Gear Box Read more
Bearings
Verified · SKU 126887Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory. Read more
Bushing order for down equipment
Verified · SKU 119315Great Service, Prompt delivery! Read more
Replacement pillow block bearing
Verified · SKU 126843I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon. Read more
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/