We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 26Q12R56 TIGEAR-2 worm gear speed reducer, 12:1 ratio, quill input, right side solid output shaft 1.1250" diameter, 56C frame, 2.6" center distance. Cast iron housing, 4.08 HP input rating, 1654 in-lb output torque. - Ratio: 12:1
- Center Distance: 2.6"
- Input: 56C Flange
- Output Bore/Shaft Diameter: 1.25"
- Output: Right Side Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 4.08
- Output Horse Power: 3.63
MODEL 26Q12R56
Contact supplier for technical support on: +1-864-284-5700
$1,301.91 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Gearbox component type
Gearbox
Horsepower rating input
4.0800 hp, 3.042 kW
Horsepower rating output
3.6300 hp, 2.707 kW
Housing material
Cast iron
Input
56C flange
Input HP
4.08
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
12
Output
Right side solid output shaft
Output bore/shaft diameter
1.25 in
Output horse power
3.63
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
5.4900 in, 139.446 mm
Output style
Right
Overhung load
1610 lbf, 7161.637 N
Paint type
Standard
Paint/coating
Green
Rated torque output
1654 in/lb, 1654.0 in/lb
Ratio
12 to 1
Seal type
Single-lip contact
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
No
Thermal horsepower rating
4.7200 hp, 3.52 kW
- Gear Type: Right-angle worm gear design
- Ratio: 12:1 reduction ratio
- Output Shaft: Right side solid shaft, 1.1250" diameter
- Input Type: Quill input (most compact configuration)
- Frame: 56C NEMA motor flange mounting
- Center Distance: 2.6" case size 26
- Power Rating: 4.08 HP input capacity
- Torque Output: 1654 in-lb maximum
- Housing: Cast iron construction with green paint finish
- Applications: Conveyors, mixers, agitators, pumps requiring compact right-angle drive
#5009419
Brand
Dodge
Model
26A12R56
#5009662
Brand
Dodge
Model
26S18R
#151756
Brand
Dodge
Model
26A07LR18
#151416
Brand
Dodge
Model
26A07L56
#5009400
Brand
Dodge
Model
26A12L14
| Brand | MROSupply Fasteners |
| Model | FSTPCK-570038 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-494120 |
| Brand | U.S. Seal Mfg. |
| Model | PS-112-EPR |
| Brand | Cutler Hammer |
| Model | 10250T297LLP24 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-W55516 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-592714 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-474008 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/