We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 26Q25H14LT TIGEAR-2 worm gear speed reducer, 25:1 ratio, quill input, hollow bore output, 140TC frame, 2.6" center distance. Cast iron housing, 2.26 HP rated, 1677 lb-in output torque. Totally enclosed, maintenance-free design. - Ratio: 25:1
- Center Distance: 2.6"
- Input: 140TC Flange
- Output Bore/Shaft Diameter: 1.4375"
- Output: Hollow Bore
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 2.26
- Output Horse Power: 1.86
MODEL 26Q25H14LT
Contact supplier for technical support on: +1-864-284-5700
$1,765.34 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
2.8700 in, 72.898 mm
Bore dia output
1.4380 in, 36.525 mm
Bore length
6.6200 in, 168.148 mm
Case size
26
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Gearbox component type
Gearbox
Horsepower rating input
2.2600 hp, 1.685 kW
Horsepower rating output
1.8600 hp, 1.387 kW
Housing material
Cast iron
Input
140TC flange
Input HP
2.26
Input style
Quill
Lubrication type
PAG, low temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
25
Output
Hollow bore
Output bore/shaft diameter
1.4375 in
Output horse power
1.86
Output shaft center to input motor mounting face distance
5.4900 in, 139.446 mm
Output style
Hollow
Overhung load
1610 lbf, 7161.637 N
Paint type
Standard
Paint/coating
Green
Rated torque output
1677 in/lb, 1677.0 in/lb
Ratio
25 to 1
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
3.0000 hp, 2.237 kW
- Product Type: TIGEAR-2 worm gear speed reducer
- Gear Ratio: 25:1 reduction
- Input Type: Quill input (most compact design)
- Output Type: Hollow bore 1.4375" diameter
- Frame Size: 140TC motor flange
- Center Distance: 2.6" (case size 26)
- Housing Material: Cast iron construction
- HP Rating: 2.26 HP input capacity
- Output Torque: 1,677 lb-in maximum
- Design: Totally enclosed, ventless, maintenance-free operation
- Weight: 52 lbs
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#6001072
Brand
Winsmith
Model
U2625HM14
#5009577
Brand
Dodge
Model
26Q25H14LT
#142517
Brand
Dodge
Model
26Q25H14
#144074
Brand
Dodge
Model
26A25H14
#144060
Brand
Dodge
Model
26A25H14WP
#142517
Brand
Dodge
Model
26Q25H14
#144060
Brand
Dodge
Model
26A25H14WP
#144074
Brand
Dodge
Model
26A25H14
#151539
Brand
Dodge
Model
26Q25H14WP
#6001072
Brand
Winsmith
Model
U2625HM14
| Brand | SIEGMA |
| Model | 5GN150RC |
| Brand | Lubriplate |
| Model | L0226-039 |
| Brand | Dichtomatik |
| Model | 75171876 |
| Brand | Consolidated Bearings |
| Model | AH-3136 X 170 MM |
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/